Bedienungsanleitung Epson SureColor SC-F6000 (Seite 28 von 81) (Englisch)

617672

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Press the d/u buttons to highlight Custom

Paper Setting and press the Z button.

The Custom Paper Setting menu will be

displayed.

Press the d/u buttons to select the bank (1 to 10)

where you want to save the custom paper

settings, then press the Z button.

The custom paper settings menu for the selected

number will be displayed.

Note that if you select a number for which

settings have already been saved, the old settings

will be overwritten.

Note:

Press the W button to close the settings menu.

Select Reference Paper

Select the paper type that is the closest in characteristics

to the paper you are using.

Select Select Reference Paper in the paper

settings menu, then press the Z button.

Press the d/u buttons to select reference paper,

and then press the Z button.

Press the d/u buttons to select the paper closest

to the one you are using, then press the Z

button.

Press the y button twice to return to the paper

settings menu.

Platen Gap

Select the platen gap which is the distance between the

print head and the paper. Normally, select Standard.

Select a wider setting if printed images are smeared. If,

upon performing head alignment you feel that it is still

not completely aligned, select Narrow.

Press the d/u buttons on the paper settings

menu to highlight Platen Gap and then press the

Z button.

Press the d/u buttons to select the target setting

value, and then press the Z button.

Press the y button to return to the paper settings

menu.

Detect Paper Thickness

You can print out a paper thickness detection pattern to

determine and set the optimal paper thickness based on

the printout.

Press the d/u buttons on the paper settings

menu to highlight Detect Paper Thickness and

then press the Z button.

Press the Z button to print the paper thickness

detection pattern.

Press the d/u buttons to select the number of the

pattern with the least amount of discrepancy

between the lines in the printout, and then press

the Z button to return the printer to the

ready-to-print state.

Paper Feed Adjust

If the paper feed amount is not set correctly, banding

(horizontal band patterns or discoloration) may occur.

If the banding is not resolved after head cleaning or

Head Alignment is performed, adjust the amount of

paper feed correction. This value can be set in either of

the following two ways:

❏ Pattern

Visually check the printed pattern and enter the

correction value.

❏ Value

Change the value based on the banding observed.

The correction value is set as the ratio in relation to

1 meter (-0.70 to +0.70%).

Printing an Alignment Pattern for Correction

Select Custom Paper Setting from the paper

menu.

Press the d/u buttons to select the bank where

you want to save the custom paper settings, then

press the Z button.

Press the d/u buttons to highlight Paper Feed

Adjust and press the Z button.

SC-F6000 Series User’s Guide

Basic Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F6000 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info