Bedienungsanleitung Epson SureColor SC-F6000 (Seite 46 von 81) (Englisch)

617672

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Cleaning the print head

From the control panel you can clean all nozzles or select

to clean only those nozzles for which the printed nozzle

check pattern indicates a problem.

Notes on head cleaning

Note the following points when performing head

cleaning.

❏ Clean the print head only if print quality declines;

for example, if the printout is blurry or the color is

incorrect or missing. Ink is consumed when head

cleaning is performed.

❏ Cleaning all nozzles consumes some of each color of

ink. Even if you are using only black inks for black

and white printing, color inks are also consumed.

❏ When repeating head cleaning in a short time

period, the Maintenance Box may fill up quickly

due to a small amount of ink evaporation in the

Maintenance Box. Prepare a spare Maintenance

Box if there is not enough empty space in the box.

❏ If the nozzles are still clogged after performing head

cleaning, turn off the printer and leave it overnight

or longer. When left for some time, the clogged ink

may dissolve.

If the nozzles are still clogged, contact your dealer or

Epson Support.

Cleaning the print head

Buttons that are used in the following settings

Confirm that the printer is ready to print. Press

the " button.

The Maintenance menu will be displayed.

Press the d/u buttons to highlight Head

Cleaning and press the Z button.

Select the method for specifying the nozzle rows

for cleaning.

All Nozzles

Inspect the printed pattern and select this

method if all patterns contain faint or missing

areas. If you selected All Nozzles, skip ahead to

Step 5.

Selected Nozzles

Inspect the printed pattern and select this

method if only certain pattern numbers (nozzle

rows) contain faint or missing areas. You can

select multiple nozzle rows.

Select nozzle rows for cleaning.

❏ Press the d/u buttons to highlight numbers

corresponding to check patterns with faint or

missing segments and press the Z button to

select.

❏ Once you have selected all the nozzle rows for head

cleaning, highlight Proceed and press the Z

button.

Select the cleaning level, then press the Z

button.

Head cleaning will be performed.

Once head cleaning is finished, the settings menu

will close. Review the printed check pattern to

confirm that all heads have been cleaned.

U “Checking for clogged nozzles” on page 45

Minimizing Print Misalignments

(Head Alignment)

Because there is a small distance between the print head

and paper, misalignment may occur due to humidity or

temperature, the inertial force of the print head's

movements, or by moving the print head

bidirectionally. This may result in grainy prints or lines

that are incorrectly placed. When this happens, perform

Head Alignment to correct the print misalignment.

For head alignment, you need to check the pattern and

enter the optimum adjustment value for alignment.

SC-F6000 Series User’s Guide

Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F6000 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info