Bedienungsanleitung Epson SureColor SC-F6200 (Seite 78 von 99) (Englisch)

617673

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

Is the roll paper margin set to 15 mm or 35

mm?

If the value selected for Roll Paper Margin in the

Setup menu is wider than the margins selected in the

application, priority will be given to the value selected

for Roll Paper Margin. For example, if 15 mm is

selected for the left and right margins in the printer

menus and the document fills the page, the 15 mm at

the left and right sides of the page will not be printed.

U “Printable area” on page 36

Vertical ruled lines are misaligned.

Is the print head misaligned? (in bidirectional

printing)

With bidirectional printing, the print head prints while

moving left and right. If the print head is misaligned,

ruled lines may be misaligned accordingly. If vertical

ruled lines are misaligned with bidirectional printing,

perform Head Alignment.

U “Minimizing Print Misalignments (Head

Alignment)” on page 71

The printed surface is scuffed or

soiled.

Is the paper too thick or too thin?

Check that the paper specifications are compatible

with this printer. For information about the paper

types and appropriate settings for printing when

using RIP software, contact the manufacturer of the

RIP.

Is the paper creased or folded?

Do not use old paper or paper with folds in it. Always

use new paper.

Is the print head scuffing the printed surface?

If the surface of the paper is scuffed, select a Platen

Gap option between Wide and Wider in the Paper

menu.

U “Paper menu” on page 44

Is the print head scuffing the edge of the

paper?

Select Top35mm/Bottom15mm as the Roll Paper

Margin option in the Setup menu.

U “Setup menu” on page 48

Widen the bottom margin

Depending on the content of the print data, the

bottom edge may be scuffed when printing. In this

situation it is best to create your data with a bottom

margin of 150 mm.

Does the interior of the printer need

cleaning?

The rollers may need cleaning. Clean the rollers by

feeding and ejecting paper.

U “Cleaning the inside” on page 53

The reverse side of the printed paper

is soiled.

Select On for Paper Size Check in the menus.

Although under normal circumstances printing stops

if the print image is wider than the paper, the printer

may print outside the bounds of the paper when Off is

selected for Paper Size Check in the Setup menu. If it

prints beyond the edges of the paper, the inside of the

printer becomes dirty with ink.

Changed settings are reflected when the paper is

re-loaded.

U “Setup menu” on page 48

Is ink dry on the printed surface?

Depending on the printing density and paper type,

the ink may take a while to dry. Do not stack the paper

until the printed surface is dry.

U “Cleaning the inside” on page 53

Ink drops

SC-F6200 Series/SC-F6000 Series User's Guide

Problem Solver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F6200 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F6200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info