Bedienungsanleitung Epson SureColor SC-F7000 (Seite 80 von 101) (Englisch)

617674

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

Troubleshooting

You cannot print (because the

printer does not work)

The printer does not turn on.

Is the power cable plugged into the electrical

outlet or the printer?

Make sure the power cable is securely plugged into

the printer.

Is there any problem with the electrical

outlet?

Make sure your outlet works by connecting the power

cable for another electric product.

The printer is not communicating

with the computer.

Is the cable plugged in properly?

Make sure the printer’s interface cable is securely

plugged into the correct terminal of the computer

and the printer. Also, make sure the cable is not

broken nor bent. If you have a spare cable, try

connecting with the spare cable.

Does the interface cable specification match

the specifications for the computer?

Make sure the interface cable specifications match

the specifications for the printer and the computer.

U “Specifications Table” on page 88

When using a USB hub, is it being used

correctly?

In the USB specification, daisy-chains of up to five USB

hubs are possible. However, we recommend that you

connect the printer to the first hub connected directly

to the computer. Depending on the hub you are

using, the operation of the printer may become

unstable. If this should occur, plug the USB cable

directly into your computer’s USB port.

Is the USB hub recognized correctly?

Make sure the USB hub is recognized correctly on the

computer. If it has, disconnect the USB hub from the

computer and connect the computer directly to the

printer. Ask the USB hub manufacturer about USB hub

operation.

You cannot print under the network

environment.

Are the network settings correct?

Ask your network administrator for the network

settings.

Connect the printer directly to the computer

using a USB cable, and then try to print.

If you can print via USB, there are some problems on

the network environment. Ask your system

administrator, or refer to the manual for your network

system. If you cannot print via USB, see the

appropriate section in this User’s Guide.

The printer has an error.

Confirm if errors have occurred in the printer

by checking the lights and messages on the

printer’s control panel.

U “Control panel” on page 14

U “When a Message is Displayed” on page 78

The printer sounds like it is

printing, but nothing prints

The print head moves, but nothing

prints.

Confirm the printer operation.

Print a test pattern. Test patterns can be printed

without connecting the printer to a computer and

hence can be used to check printer function and

status. U “Checking for clogged nozzles” on

page 51

Refer to the following section for information on what

to do if the pattern does not print correctly.

Is the message Motor Self Adjustment

displayed on the control panel’s screen?

The printer adjusts the internal motor. Wait for a while

without turning off the printer.

SC-F7000 Series User’s Guide

Problem Solver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F7000 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F7000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info