Bedienungsanleitung Epson SureColor SC-F7200 (Seite 25 von 177) (Englisch)

617676

Zoom out

Zoom in

Vorherige Seite

1/177

Nächste Seite

❏ Close all covers before placing the printer in

storage. If you are not using the printer for a long

time, put an anti-static cloth or cover on the printer

to prevent dust. The print head nozzles are very

small, and they can become clogged easily if fine

dust gets on the print head, and you may not be able

to print properly.

❏ If you have not used the printer for a long time,

check the print head for clogging before you start

printing. Perform head cleaning if the print head is

clogged.

U “Checking for Clogged Nozzles” on page 99

❏ When storing the printer, be sure that it is level: do

not store it on an angle, on end, or upside down.

Notes on Handling Ink Packs and

Ink Tanks

Note the following points when handling ink packs and

ink tanks.

❏ Do not remove the ink tanks.

Ink tanks are calibrated when installed. Removing

them can harm quality and functionality.

❏ Store ink packs at room temperature out of direct

sunlight.

❏ To ensure print quality, use all the ink in the ink

pack before the earlier of the following dates:

❏ The date printed on the ink pack

❏ 25 days from the day that the ink tank was

refilled from the ink pack

❏ If the ink pack has been stored in a cold location for

a long period of time, keep at room temperature for

at least 4 hours before using.

❏ When refilling the ink in an ink tank, be sure to use

all the ink in the ink pack at once.

❏ Refill the ink tank as soon as possible after opening

the ink pack.

❏ Do not place items on the ink tank or subject the ink

tank to strong impacts. The ink tank could be

detached.

If the ink tank comes off, contact your dealer or

Epson Support.

❏ Do not use if the High Density Black and Black inks

are mixed. When changing the type of Black ink

being used, the ink tank should only be changed by a

service engineer. Changing the type of Black ink is

provided for a fee.

Contact your dealer or Epson Support.

Handling Media

Note the following when handling or storing media.

Media that are in poor condition will not produce good

quality prints.

Be sure to read the documentation provided with each

type of media.

Notes on Handling

❏ Do not fold the media or damage the printable

surface.

❏ Do not touch the printable surface. Moisture and

oils from your hands can affect print quality.

❏ When handling media, hold it by both edges. We

recommend wearing cotton gloves.

❏ Keep the media dry.

❏ Packaging materials can be used to store media and

should not be thrown away.

❏ Avoid locations that are subject to direct sunlight,

excessive heat, or humidity.

❏ When not in use, media should be removed from

the printer, rewound, and inserted in its original

packaging for storage. Leaving media in the printer

for extended periods may cause it to deteriorate.

Handling Media After Printing

To maintain long lasting, high quality print results, note

the following points.

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F7200 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F7200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info