Bedienungsanleitung Epson SureColor SC-P400 (Seite 14 von 111) (Englisch)

617678

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

❏ Store the printer after confirming that the print

head has been capped (the print head is positioned

at the far right). If the print head is left uncapped for

a long time, the print quality may decline.

Note:

If the print head is not capped, turn the printer on, and

then turn it off.

❏ Before storing the printer, close the printer cover,

output tray and paper support. If you are not using

the printer for a long time, put an anti-static cloth or

cover on the printer to prevent dust. The print head

nozzles are very small. They can become clogged

easily if fine dust gets on the print head, and you

may not be able to print properly.

❏ If the printer has been left unused for an extended

period, check that the print head nozzles are not

clogged before resuming printing. Perform head

cleaning if the print head is clogged.

U “Checking for clogged nozzles” on page 77

Notes on handling ink cartridges

Note the following points when handling ink cartridges

to maintain good print quality.

❏ As part of the initial ink charging process

performed after purchase, some ink is used to fill

the print head nozzles to the tips and ready them for

printing. As a result, the first ink cartridges installed

after purchase will print fewer pages than

subsequent cartridges.

❏ We recommend storing ink cartridges in a cool,

dark place, and using them before the expiry date on

the package. Use cartridges within six months of

opening.

❏ Do not open the ink cartridge package until you are

ready to install it in the printer. The cartridge is

vacuum packed to maintain its reliability.

❏ If you move ink cartridges from a cold place to a

warm place, leave them at room temperature for

more than three hours before using the ink

cartridge.

❏ Make sure you remove the yellow tape before

installing. If you install without removing the tape,

you may not be able to print properly. Do not

remove any other film or labels. Otherwise, ink

could leak.

❏ Do not touch the IC chip in the ink cartridge. You

may not be able to print properly.

U “Replacing Ink Cartridges” on page 80

❏ Install ink cartridges into all slots. You cannot print

if any slot is empty.

❏ Do not replace ink cartridges when the printer is off.

Do not move the print head by hand; otherwise, the

printer may be damaged.

❏ Do not turn off the printer during ink charging. Ink

charging may not complete normally, making the

printer unable to print.

❏ Do not leave the printer without ink cartridges

installed or turn the printer off during ink cartridge

replacement. If the print head (nozzles) dries, you

may not be able to print.

❏ Because the green IC chip contains the cartridge's

own information such as the remaining ink level,

you can still reinstall and use the ink cartridge after

removing it from the printer. Note, however, that

you may not be able to reuse ink cartridges that

contained very little ink when they were removed

from the printer. Some ink may also be used to

ensure reliable operation when the cartridges are

reinserted.

❏ Removed ink cartridges may have ink around the

ink supply port, so be careful not to get any ink on

the surrounding area when removing the

cartridges.

❏ To maintain the quality of the print head, this

printer stops printing before ink cartridges are

completely expended.

❏ Although the ink cartridges may contain recycled

materials, this does not effect printer function or

performance.

❏ Do not dismantle or remodel ink cartridges. You

may not be able to print properly.

❏ All colors of ink are used during ink cartridge

replacement, head cleaning, and other

non-printing maintenance operations to ensure

that the print head remain in good condition.

❏ Depending on the paper type and print quality

settings, colored inks may also be used for

high-density blacks in monochrome or grayscale

printing.

SC-P400 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-P400 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-P400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info