Bedienungsanleitung Epson SureColor SC-P9000 (Seite 19 von 197) (Englisch)

617682

Zoom out

Zoom in

Vorherige Seite

1/197

Nächste Seite

❏ Do not install the printer next to heat sources or

directly in the path of air from a ventilator or air

conditioner. Failure to observe this precaution

could result in the print head nozzles drying and

clogging.

❏ The print head may not be capped (i.e., may not

move to the right-hand side) if an error occurs and

the printer is turned off without first resolving the

error. Capping is a function for automatically

covering the print head with a cap (lid) to prevent

the print head from drying out. In this case, turn on

the power and wait a while until capping is

performed automatically.

❏ When the power is on, do not remove the power

plug or cut the power at the breaker. The print head

may not be capped properly. In this case, turn on the

power and wait a while until capping is performed

automatically.

❏ Even when the printer is not in use, some ink will be

consumed by head cleaning and other maintenance

operations needed to keep the print head in good

condition.

Notes when not using the printer

If you are not using it, note the following points when

storing the printer. If it is not stored correctly, you may

not be able to print properly the next time it is used.

❏ If you do not print for a long time, the print head

nozzles may become clogged. We recommend that

you print once a week to prevent the print head

from clogging.

❏ The roller may leave an impression on paper that is

left in the printer. This can also cause wavy or curled

paper resulting in paper feeding problems or the

print head could be scratched. Remove any paper

when storing.

❏ Store the printer after confirming that the print

head has been capped (the print head is positioned

at the far right). If the print head is left uncapped for

a long time, the print quality may decline.

Note:

If the print head is not capped, turn the printer on, and

then turn it off.

❏ To prevent the accumulation of dust and other

foreign matter in the printer, close all covers before

placing it in storage.

If the printer will be not be used for an extended

period, protect it with an anti-static cloth or other

cover.

The print head nozzles are very small, and they can

become clogged easily if fine dust gets on the print

head, and you may not be able to print properly.

❏ When turned on after an extended period of disuse,

the printer may automatically perform head

cleaning to ensure print quality.

U “Timer Cleaning” on page 125

Notes on handling ink cartridges

Note the following points when handling ink cartridges

to maintain good print quality.

❏ The supplied ink cartridges and Maintenance Box

are for use during the initial charging. The supplied

ink cartridges and Maintenance Box will be require

replacement relatively quickly.

❏ We recommend that ink cartridges be stored at

room temperature out of direct sunlight and used

before the expiry date printed on the packaging.

❏ For optimum print quality, we recommend using

up ink within six months after installing in the

printer.

❏ Ink cartridges that have been stored at low

temperatures for an extended period should be

allowed to return to room temperature over a

period of four hours.

❏ Do not touch the IC chips on the ink cartridges. You

may not be able to print properly.

❏ Install all ink cartridges into each slot. You cannot

print if any of the slots are empty.

❏ Do not leave the printer without ink cartridges

installed. The ink in the printer may dry, preventing

it from printing as expected. Leave ink cartridges in

all slots even while you do not use the printer.

❏ The ink level and other data are stored in the IC

chip, allowing cartridges to be used after being

removed and replaced.

SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-P9000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-P9000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info