Bedienungsanleitung Epson SureColor SC-S40600 (Seite 55 von 124) (Englisch)

617689

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Precautions regarding

maintenance

Note the following points when cleaning and replacing

parts.

Caution:

❏ Store ink cartridges, Cleaning Cartridge, ink

cleaner, grease, and waste ink in a location out

of reach of children.

❏ During maintenance, wear protective clothing,

including protective eyewear, gloves, and a

mask.

If ink, waste ink, ink cleaner, or grease contact

your skin or enter your eyes or mouth, take the

following actions:

❏ If fluid adheres to your skin, immediately

wash it off using large volumes of soapy

water. Consult a physician if the skin

appears irritated or is discolored.

❏ If fluid enters your eyes, rinse immediately

with water. Failure to observe this

precaution could result in bloodshot eyes or

mild inflammation. If problems persist,

consult with a physician.

❏ If fluid enters your mouth, consult a

physician immediately.

❏ If fluid is swallowed, do not force the person

to vomit, and consult with a physician

immediately. If the person is forced to

vomit, fluid may get caught in the trachea

which can be dangerous.

❏ After replacing the Waste Ink Bottle or using

the ink cleaner, wash your hands and gargle

thoroughly.

❏ Remove the media from the printer before

proceeding.

❏ Never touch the belts, circuit boards, or any parts

that do not require cleaning. Failure to observe this

precaution could result in malfunction or reduced

print quality.

❏ Use only the supplied cleaning sticks or sticks

contained in a maintenance kit. Other types of

sticks that produce lint will damage the print head.

❏ Always use fresh cleaning sticks. Re-using sticks

can make stains even harder to remove.

❏ Do not touch the tips of the cleaning sticks. Oil from

your hands could damage the print head.

❏ Do not use water or alcohol to clean around the

print head or the caps and so on. Ink congeals when

mixed with water or alcohol.

❏ Touch a metallic object before starting work to

discharge any static electricity.

Daily Cleaning

When lint, dust, or ink adheres to the platen heater or

the media edge plates, it could cause clogged nozzles or

ink drops to occur.

To maintain optimum printing quality, we recommend

cleaning before starting work every day.

Caution:

❏ The heaters and media edge plate may be hot;

observe all necessary precautions. Failure to

observe the necessary precautions could result

in burns.

❏ Be careful not to trap your hands or fingers

when opening or closing the front cover. Failure

to observe this precaution could result in

injury.

Important:

When cleaning inside the printer, do not use ink

cleaner. Failure to observe this precaution could

result in damaged parts.

Make sure the printer is turned off and the screen

has turned off, and then unplug the power cable

from the outlet.

Disconnect both of the power cables.

If the additional print drying system is installed,

make sure you unplug the power cable for the

additional print drying system as well.

Leave the printer for a minute.

SC-S60600 Series/SC-S40600 Series User's Guide

Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S40600 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S40600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info