Bedienungsanleitung Epson SureColor SC-S50600 (Seite 86 von 198) (Englisch)

617685

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

Choose a value.

Heater Temperature

The temperatures for the pre-, platen, and after

heaters can each be adjusted separately.

Note:

❏ The standard heater temperatures are as

follows.

❏ Set the heaters to the temperatures

recommended in the documentation

provided with the media, if available.

❏ Raise the temperature if the print results are

blurred or smudged or the ink clots. Note,

however, that raising the temperature too

high can cause the media to shrink, wrinkle,

or deteriorate.

❏ The time needed for the heaters to reach the

specified temperatures varies with the ambient

temperature.

(1)

Use the r/l buttons to select a heater. From

left, the options are pre-heater, platen heater,

and after heater.

(2)

After selecting the desired heater, use the d/u

buttons to choose the temperature.

(3)

After making the setting, press the Z button.

Additional Dryer

Note:

❏ This menu is displayed only when the optional

additional print drying system (supplied with

the SC-S50600 series; optional with other

models) is installed.

❏ The default setting is set to On, and the drying

fan turns on automatically when printing

starts.

(1)

Use the d/u buttons to select On or Off.

(2)

Press the Z button.

Press the y button twice to return to the

customize settings menu.

Media Adjust

This menu is used to adjust media when Auto Media

Adjust cannot be used or when reconfiguring media

settings is required due to a change made in printing

conditions after saving the media settings. In this menu,

perform Feed Adjustment and Head Alignment

individually.

Media adjustment when Auto Media Adjust cannot

be used

When you cannot adjust media using Auto Media

Adjust or when banding or graininess is detected in

printing results even after Auto Media Adjust has been

performed, select Feed Adjustment - Manual and

Head Alignment - Standard (Manual) to take

appropriate actions.

When changing printing conditions after saving

media settings

After saving media settings, select Feed Adjustment -

Auto in this menu when:

❏ The Media Tension or Media Suction setting has

been changed in Advanced Settings;

❏ Counterweights have been attached to or detached

from the tensioner;

❏ The standard media unit and the optional heavy roll

media system have been switched; or

❏ The configuration of pressure rollers have been

changed (SC-S70600 series, SC-S50600 series).

When Platen Gap has been changed, select Head

Alignment - Standard (Auto) in this menu. However, if

the setting value is changed to 2.5, auto adjustment

becomes unavailable. Perform Standard (Manual).

Change the setting values of the following items before

executing this menu.

❏ Platen Gap

❏ Advanced Settings

U “Customize Settings” on page 145

Feed Adjustment

This menu is used when banding (horizontal banding,

tint unevenness, or stripes) is detected in printing

results.

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide

Basic Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S50600 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S50600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info