Bedienungsanleitung Epson SureColor SC-S50610 (Seite 21 von 198) (Englisch)

617686

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

❏ Pressing this button when a menu item is highlighted

displays options for the selected item.

❏ Pressing this button when an option is highlighted

selects the highlighted item or performs the selected

operation.

❏ Pressing this button while the alert buzzer is sounding

stops the buzzer.

button (heating/drying button)

Pressing this button displays the Heating & Drying

menu, where you can adjust the Heater

Temperature. If the additional print drying system

(supplied with the SC-S50600 series; optional with

other models) is attached, you can also adjust

Additional Dryer settings. These options can be

adjusted during printing.

U “Heating & Drying” on page 89

K # button (maintenance button)

Pressing this button displays the Maintenance menu

on the screen to perform Nozzle Check, Cleaning,

Ink Circulation, Ink Refresh, Head Maintenance,

Waste Ink Counter, Head Washing, and

Pre-Storage Maint. This button is disabled during

printing.

U “The Maintenance Menu” on page 151

L W button (pause/cancel button)

❏ The printer enters pause status if this is pressed while

printing. To release the pause status, press the W

button again, or select Pause Cancel on the screen

and then press the Z button. To cancel print jobs

being processed, select Job Cancel on the screen and

then press the Z button.

❏ Pressing this button when menus are displayed closes

the menus and returns the printer to ready status.

button (media feed button)

❏ When the printer is in the ready state, you can feed the

media to the cut position by pressing this button and

then Z.

U “Cutting Media” on page 64

❏ When printing is in progress, you can use this button

to perform feed adjustment.

U “Feed Adjustment” on page 90

Understanding the Display

The illustration shows the display for the SC-S50600

series.

A Messages

Displays the printer's status, operation, and error

messages.

U “When a Message is Displayed” on page 156

B Heater temperature

From left to right, this display shows the temperature

settings for the pre-heater, platen heater, and after

heater. The thermometer icons give a rough indica‐

tion of the current temperatures of the heaters.

: The heater has reached the selected

temperature.

: The heater has not reached the selected

temperature.

C Feed adjustment information during printing

This information is displayed when the adjustment

value is specified during printing.

U “Feed Adjustment” on page 90

D Media info

❏ From left to right, this display shows the selected

media, platen gap, media width, and media

remaining.

❏ If a media setting bank number registered with this

printer is selected as the print media, the number

(from 1 to 30) will be displayed. When RIP Settings is

selected, 0 will be displayed.

❏ The selected platen gap is shown as follows.

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S50610 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S50610

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info