Bedienungsanleitung Epson SureColor SC-S70600 (Seite 28 von 198) (Englisch)

617687

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

❏ Do not dismantle or remodel ink cartridges. You

may not be able to print properly.

❏ Do not drop or knock it against hard objects;

otherwise, the ink may leak from the cartridge.

❏ With the exception of spot color inks, ink cartridges

must be removed and thoroughly shaken once

every three weeks.

Shaking ink cartridges U “Shaking” on

page 118

❏ Do not insert or remove replacement cartridges

during printing.

Handling Media

Note the following when handling or storing media.

Media that are in poor condition will not produce good

quality prints.

Be sure to read the documentation provided with each

type of media.

Notes on Handling

❏ Do not fold the media or damage the printable

surface.

❏ Do not touch the printable surface. Moisture and

oils from your hands can affect print quality.

❏ When handling media, hold it by both edges. We

recommend wearing cotton gloves.

❏ Keep the media dry.

❏ Packaging materials can be used to store media and

should not be thrown away.

❏ Avoid locations that are subject to direct sunlight,

excessive heat, or humidity.

❏ When not in use, media should be removed from

the printer, rewound, and inserted in its original

packaging for storage. Leaving media in the printer

for extended periods may cause it to deteriorate.

Handling Media After Printing

To maintain long lasting, high quality print results, note

the following points.

❏ Do not rub or scratch the printed surface. If they are

rubbed or scratched, the ink may peel off.

❏ Do not touch the printed surface, as this may

remove the ink.

❏ Make sure printouts are completely dry before

folding or stacking, otherwise discoloration or

other marks may appear where the prints touch.

These marks will disappear if the prints are

immediately separated and dried but will become

permanent if the surfaces are not separated.

❏ Avoid direct sunlight.

❏ To prevent discoloration, display and store prints as

instructed in the documentation supplied with the

media.

Notes on Usage of Spot

color Inks (SC-S70600

series, SC-S50600 series)

Spot color inks may be sedimented (components

settling to the bottom of the liquid) due to ink

characteristics. Sedimentation triggers tint unevenness

in printing results or clogged nozzles.

Before using spot color inks, take note of the following

cautions.

❏ The printer provides a function (auto ink

circulation) that automatically circulates inks in the

print head or tube at periodic intervals to prevent

inks from being sedimented.

❏ When using this function, we recommend

that you do not turn the printer off. If the

power is turned off, auto ink circulation is

not performed at the appropriate times. This

causes irresolvable sedimentation, which

results in damage. When not using the

printer for a long period of time, see:

U “Long-term Storage (Pre-storage

Maintenance)” on page 132

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S70600 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S70600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info