Bedienungsanleitung Epson SureColor SC-T3000 (Seite 18 von 163) (Englisch)

617691

Zoom out

Zoom in

Vorherige Seite

1/163

Nächste Seite

Notes when using the printer

Note the following points when using this printer to

avoid breakdowns, malfunctions, and print quality

decline.

❏ When using the printer, observe the operating

temperature and humidity range described in the

"Specifications Table". U “Specifications Table”

on page 149

Even when the conditions above are met, you may

not be able to print properly if the environmental

conditions are not suitable for the paper. Be sure to

use the printer in an environment where the paper’s

requirements are met. For more details, see the

documentation supplied with the paper.

Also, when operating in dry areas, air conditioned

environment, or under direct sunlight, maintain

the appropriate humidity.

❏ Do not install the printer next to heat sources or

directly in the path of air from a ventilator or air

conditioner. Failure to observe this precaution

could result in the print head nozzles drying and

clogging.

❏ The print head may not be capped (i.e., may not

move to the right-hand side) if an error occurs and

the printer is turned off without first resolving the

error. Capping is a function for automatically

covering the print head with a cap (lid) to prevent

the print head from drying out. In this case, turn on

the power and wait a while until capping is

performed automatically.

❏ When the power is on, do not remove the power

plug or cut the power at the breaker. The print head

may not be capped properly. In this case, turn on the

power and wait a while until capping is performed

automatically.

❏ Even when the printer is not in use, some ink will be

consumed by head cleaning and other maintenance

operations needed to keep the print head in good

condition.

Notes when not using the printer

If you are not using it, note the following points when

storing the printer. If it is not stored correctly, you may

not be able to print properly the next time it is used.

❏ If you do not print for a long time, the print head

nozzles may become clogged. We recommend that

you print once a week to prevent the print head

from clogging.

❏ The roller may leave an impression on paper that is

left in the printer. This can also cause wavy or curled

paper resulting in paper feeding problems or the

print head could be scratched. Remove any paper

when storing.

❏ Store the printer after confirming that the print

head has been capped (the print head is positioned

at the far right). If the print head is left uncapped for

a long time, the print quality may decline.

Note:

If the print head is not capped, turn the printer on, and

then turn it off.

❏ To prevent the accumulation of dust and other

foreign matter in the printer, close all covers before

placing it in storage.

If the printer will be not be used for an extended

period, protect it with an anti-static cloth or other

cover.

The print head nozzles are very small, and they can

become clogged easily if fine dust gets on the print

head, and you may not be able to print properly.

❏ When turned on after an extended period of disuse,

the printer may automatically perform head

cleaning to ensure print quality.

Head cleaning will end after about 10 to 15 minutes.

Notes on handling ink cartridges

Note the following points when handling ink cartridges

to maintain good print quality.

❏ The supplied ink cartridges and Maintenance Box

are for use during the initial charging. The supplied

ink cartridges and Maintenance Box will be require

replacement relatively quickly.

❏ We recommend that ink cartridges be stored at

room temperature out of direct sunlight and used

before the expiry date printed on the packaging.

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-T3000 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-T3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info