Bedienungsanleitung Epson WF-2850 series WorkForce (Seite 84 von 234) (Englisch)

771867

Zoom out

Zoom in

Vorherige Seite

1/234

Nächste Seite

Selecting Check Fax Connection checks that the printer is connected to the phone line and ready for fax

transmission. You can print the check result on A4 size plain paper.

Fax Setting Wizard

You can nd the menu on the printer's control panel below:

Settings > General Settings > Fax Settings > Fax Setting Wizard

Selecting Fax Setting Wizard makes basic fax settings. Follow the on-screen instructions.

Related Information

&“Making the Printer Ready to Send and Receive Faxes (Using Fax Setting Wizard)” on page 77

Basic Settings Menu

You c a n nd the menu on the printer's control panel below:

Settings > General Settings > Fax Settings > Basic Settings

Item Description

Fax Speed Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a

communication error occurs frequently, when sending/receiving a fax to/from abroad, or when

you are using an IP (VoIP) phone service.

ECM Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by

telephone line noise. If this is disabled, you cannot send or receive documents in color.

Dial Tone Detection Detects a dial tone before starting to dial. If the printer is connected to a PBX (Private Branch

Exchange) or digital phone line, the printer may fail to start dialing. In this situation, change the

Line Type setting to PBX. If this does not work, disable this feature. However, disabling this

feature may drop the rst digit of a fax number and send the fax to the wrong number.

Dial Mode Select the type of phone system to which you have connected the printer. When set to Pulse,

you can temporarily switch the dialing mode from pulse to tone by pressing ("T" is entered)

while entering numbers on the fax top screen. This setting may not be displayed depending on

your region or country.

Line Type Select the line type to which you have connected the printer.

When using the printer in an environment that uses extensions and requires an external access

code, such as 0 and 9, to get an outside line, select PBX and register the access code. Once you

have registered the access code, enter # (hash) instead of the access code when sending a fax to

an outside fax number. For an environment that uses a DSL modem or terminal adapter, setting

to PBX is also recommended.

You cannot send faxes to recipients in Contacts in which an external access code such as 0 or 9

is set. If you have added recipients in Contacts using an external access code such as 0 or 9, set

the Access Code to Do Not Use. Otherwise, you must change the code to # in Contacts.

Header Enter your sender name and fax number. These appear as a header on outgoing faxes.

❏Your Phone Number: You can enter up to 20 characters using 0-9 + or space.

❏Fax Header: You can register up to 21 sender names as necessary. You can enter up to 40

characters for each sender name.

Receive Mode Select the receive mode. For details, see the related Information below.

User's Guide

Fax Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson WF-2850 series WorkForce Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson WF-2850 series WorkForce

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info