Bedienungsanleitung Epson WORKFORCE AL-C300 (Seite 91 von 102) (Englisch)

617864

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Item Explanation

020 Special Adjusts the print quality for special paper according to the paper type.

Settings (default in bold):

0: Plain paper

1: Coated paper 1

2: Coated paper 2

051 Feed Offset Do this adjustment after you have eliminated the variation between the paper sources by

055 Feed Reg1 MP/059 Feed Reg1 C1/063 Feed Reg1 C2.

This function adjusts the vertical position at which to start printing. The position moves

lower on the sheet of paper as the value increases. This setting is used when doing

single-sided printing or printing on the back side of the sheet of paper for duplex printing.

Settings (default in bold):

-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments

052 Scan Offset Do this adjustment after you have eliminated the variation between the paper sources by

056 Scan Reg1 MP/060 Scan Reg1 C1/064 Scan Reg1 C2.

This function adjusts the horizontal position at which to start printing. The position moves

to the right of the sheet of paper as the value increases. This setting is used when doing

single-sided printing or printing on the back side of the sheet of paper for duplex printing.

Settings (default in bold):

-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments

053 Feed Offset2 Do this adjustment after you have eliminated the variation between the paper sources by

057 Feed Reg2 MP/061 Feed Reg2 C1/065 Feed Reg2 C2.

This function adjusts the vertical position at which to start printing. The position moves

lower on the sheet of paper as the value increases. This setting is used when printing on

the front side of the sheet of paper for duplex printing.

Settings (default in bold):

-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments

054 Scan Offset2 Do this adjustment after you have eliminated the variation between the paper sources by

058 Scan Reg2 MP/062 Scan Reg2 C1/066 Scan Reg2 C2.

This function adjusts the horizontal position at which to start printing. The position moves

to the right of the sheet of paper as the value increases. This setting is used when printing

on the front side of the sheet of paper for duplex printing.

Settings (default in bold):

-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments

055 Feed Reg1 MP

059 Feed Reg1 C1

063 Feed Reg1 C2

Adjusts the vertical position at which to start printing and eliminate the variation between

the paper sources. The position moves lower on the sheet of paper as the value increases.

This setting is used when feeding paper from the MP tray, C1, or C2 for single-sided

printing or printing on the back side of the sheet of paper for duplex printing.

Settings (default in bold):

-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments

056 Scan Reg1 MP

060 Scan Reg1 C1

064 Scan Reg1 C2

Adjusts the horizontal position at which to start printing and eliminate the variation

between the paper sources. The position moves to the right of the sheet of paper as the

value increases. This setting is used when feeding paper from the MP tray, C1, or C2 for

single-sided printing or printing the back side of the sheet of paper for duplex printing.

Settings (default in bold):

-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments

AL-C300 Series User's Guide

Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson WORKFORCE AL-C300 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson WORKFORCE AL-C300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info