Bedienungsanleitung Epson WorkForce AL-M8100DN (Seite 8 von 98) (Englisch)

617861

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

❏ Never push objects of any kind through cabinet

slots as they may touch dangerous voltage points or

short out parts that could result in a risk of fire or

electric shock.

❏ Do not sit or lean on the printer. Do not put heavy

objects on the printer.

❏ Do not use any kind of combustible gases in or

around the printer.

❏ Never force the printer’s components into place.

Although the printer is designed to be sturdy, rough

handling can damage it.

❏ Do not leave jammed paper inside the printer. This

can cause the printer to overheat.

❏ Never spill liquid of any kind on the printer.

❏ Adjust only those controls that are covered by the

operating instructions. Improper adjustment of

other controls may result in damage and may

require repair by a qualified service representative.

❏ Do not turn off the printer:

-After turning on the printer, wait until Ready

appears on the LCD panel.

-While the Ready light is flashing.

-While the Data light is on or flashing.

-While printing.

❏ Avoid touching the components inside the printer

unless instructed to do so in this guide.

❏ Follow all warnings and instructions marked on the

printer.

❏ Except as specifically explained in the printer’s

documentation, do not attempt to service this

product yourself.

❏ Periodically disconnect the plug from the electrical

outlet and clean the blades.

❏ Do not disconnect the plug while the printer is on.

❏ If the printer will not be used for a long time,

disconnect the plug from the electrical outlet.

❏ Unplug this printer from the wall outlet before

cleaning.

❏ Use a well-wrung cloth for cleaning and do not use

liquid or aerosol cleaners.

Handling the consumable

products

❏ Do not burn used consumable products because

they might explode and injure someone. Dispose of

them according to local regulations.

❏ Be sure to keep consumable products out of the

reach of children.

❏ When handling a toner cartridge, always place it on

a clean, smooth surface.

❏ Do not attempt to modify or take it apart

consumable products.

❏ Do not touch the toner. Always keep toner away

from your eyes. If toner gets on your skin or clothes,

wash it off with soap and water immediately.

❏ If toner is spilled, use a broom and dustpan or a

damp cloth with soap and water to clean it up.

Because the fine particles can cause a fire or

explosion if they come into contact with a spark, do

not use a vacuum cleaner.

❏ Wait at least one hour before using a toner cartridge

after moving it from a cool to a warm environment

to prevent damage from condensation.

❏ To get the best print quality, do not store the toner

cartridge in an area subject to direct sunlight, dust,

salty air, or corrosive gases (such as ammonia).

Avoid locations subject to extreme or rapid changes

in temperature or humidity.

❏ Do not touch the transfer roller to avoid damaging

it.

❏ Do not let the paper’s edge slide across your skin

because the edge of the paper may cut you.

AL-M8200/AL-M8100/AL-M7100 Series User's Guide

Important Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson WorkForce AL-M8100DN Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson WorkForce AL-M8100DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info