617861
50
Zoom out
Zoom in
Vorherige Seite
1/98
Nächste Seite
A
Select Auto (Long-edge binding) or Auto
(Short-edge binding) in the 2-sided Printing list
box and click Settings.
B
Select the Booklet check box and select Side
Binding.
C
Click OK to close setting dialog box.
D
Print the document, fold in half 5 sheets by 5
sheets, overlap all sheets, and then bind them.
Using the Reserve Job function
This function allows you to store print jobs on the
printer’s memory and to print them later directly from
the printer’s control panel. You can prevent the printed
document from being looked at by other people by
applying a password to the print job.
This function uses the following memory.
Printer’s
Storage
Description
RAM Disk To enable the RAM disk, you have to set
the RAM Disk setting on the control
panel to Normal or Maximum.
The table below gives an overview of the options.
Option Description
Re-Print Job Lets you print the job now and store it on
the printer’s memory. You can print the
same job several times.
Verify Job Lets you print one copy now to verify the
content. You can print multiple copies
later.
Confidential
Job
Lets you apply a password to the print
job. You can print the job by entering
the password on the printer’s control
panel. See “Using Confidential Job” on
page 50.
Using Re-Print Job/Verify Job (Quick
Print Job feature)
Sending the print job
A
Click the Maintenance tab, then click Reserve
Jobs Settings. The Reserve Jobs Settings dialog
box appears.
B
Select the Reserve Jobs check box, then select
Re-Print Job or Verify Job.
C
Enter a user name and job name in the
corresponding text boxes.
D
Click OK.
Printing using the Quick Print Job Menu
A
Make sure the LCD panel displays Ready, then
press the r Right button to access the control
panel menus.
B
Press the d Down button repeatedly until Quick
Print JobMenu appears on the LCD panel, then
press the r Right button.
C
Use the d Down or u Up button to scroll to the
appropriate user name, then press the r Right
button.
D
Use the d Down or u Up button to scroll to the
appropriate job name, then press the r Right
button.
E
Press the r Right button, then use the d Down
and u Up buttons to select the number of copies.
To delete the print job without printing any
copies, press the d Down button to display
Delete on the LCD panel.
F
Press the r Right button to start printing or to
delete the data.
Using Confidential Job
Sending the print job
A
Click the More Options tab, then click
Confidential Job. The Confidential Job Settings
dialog box appears.
AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Printing Tasks
50
50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson WorkForce AL-M8100DN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson WorkForce AL-M8100DN

Epson WorkForce AL-M8100DN Bedienungsanleitung - Deutsch - 108 seiten

Epson WorkForce AL-M8100DN Bedienungsanleitung - Holländisch - 108 seiten

Epson WorkForce AL-M8100DN Installationsanweisung - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info