Bedienungsanleitung Epson WorkForce AL-M8200DN (Seite 6 von 98) (Englisch)

617862

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

Important Instructions

Important Safety

Instructions

Setting up the printer

❏ Because the printer is heavy, one person should not

lift or carry it. Two people should carry the printer,

lifting it by the correct positions as shown below.

Do not touch the projections on the bottom of the

printer that are for connecting an optional paper

cassette.

❏ When moving the printer, always keep it

horizontal.

❏ If you are unable to insert the AC plug into the

electrical outlet, contact an electrician.

❏ Do not connect to an uninterruptible power source.

If you connect to one, it may cause malfunctions or

damage.

❏ Be sure the AC power cord meets the relevant local

safety standards. Use only the power cord that

comes with this product. Use of another cord may

result in fire or electric shock. This product’s power

cord is for use with this product only. Use with

other equipment may result in fire or electric shock.

❏ If damage occurs to the plug, replace the cord set or

consult a qualified electrician. If there are fuses in

the plug, make sure you replace them with fuses of

the correct size and rating.

❏ Use a grounded outlet that matches the printer’s

power plug. Do not use an adapter plug.

❏ Avoid using an electrical outlet that is controlled by

wall switches or automatic timers. Accidental

disruption of power can erase valuable information

in your computer’s and printer’s memory.

❏ Make sure that there is no dust on the socket.

❏ Be sure to insert the plug completely into the

electrical outlet.

❏ Do not handle the plug with wet hands.

❏ Unplug this printer from the wall outlet and refer

servicing to a qualified service representative under

the following conditions:

A. When the power cord or plug is damaged or

frayed.

B. If liquid has been spilled into it.

C. If it has been exposed to rain or water.

D. If it does not operate normally when the

operating instructions are followed. Adjust

only those controls that are covered by the

operating instructions since improper

adjustment of other controls may result in

damage and will often require extensive

work by a qualified technician to restore the

product to normal operation.

E. If it has been dropped or the cabinet has

been damaged.

F. If it exhibits a distinct change in

performance, indicating a need for service.

❏ Avoid sharing outlets with other appliances.

❏ Connect all equipment to properly grounded

power outlets. Avoid using outlets on the same

circuit as photocopiers or air control systems that

regularly switch on and off.

❏ Connect your printer to an electrical outlet that

meets the power requirements of this printer. Your

printer’s power requirements are indicated on a

label attached to the printer. If you are not sure of

the power supply specifications in your area,

contact your local power company or consult your

dealer.

AL-M8200/AL-M8100/AL-M7100 Series User's Guide

Important Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson WorkForce AL-M8200DN Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson WorkForce AL-M8200DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info