Bedienungsanleitung Epson WorkForce AL-M8200DN (Seite 22 von 98) (Englisch)

617862

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

Item Explanation

Sleep Schedule Sets a start time and a sleep pattern for u p to five time periods through the day. The Sleep

Pattern options are as follows:

❏ On: Enters sleep mode according to the Time to Sleep(Auto) or Time to Sleep

settings.

❏ Quick: Enters sleep mode as soon as possible.

Note:

❏ You need to use EpsonNet Config with a web browser to do these settings, because

this item is not displayed on the control panel. See the Network Guide for the

procedure to access EpsonNet Config with a web browser.

❏ For an image of these settings, see “Making a weekly sleep schedule” on

page 53.

Excluded Day Specifies a special date on which to apply the sleep pattern for some other day, and

specifies the day for up to two days. Each specified date setting is valid once within the

each coming specified date.

Note:

You need to use EpsonNet Config with a web browser to do these settings, because this

item is not displayed on the control panel. See the Network Guide for the procedure to

access EpsonNet Config with a web browser.

Sleep Status Displays the status of the sleep settings for one week starting from the current day. For

example, after Time to Sleep(Auto) is set to Enable, you can check if each time-to

sleep value, based on the operation history, has been calculated or is still being prepared.

Note:

You need to use EpsonNet Config with a web browser to display the status, because this

item is not displayed on the control panel. See the Network Guide for the procedure to

access to EpsonNet Config with a web browser.

Deep Sleep Mode When this setting is set to On, the printer switches to the deep sleep mode instead of the

sleep mode if the printer is not operated or receives no jobs. In the deep sleep mode, the

Wakeup/Sleep button lights and more power is saved than when in the sleep mode.

Note:

The printer does not enter the deep sleep mode in the following cases:

- PS3 is selected in Network of Emulation Menu.

- MS Network is set to On in Network Menu.

The printer recovers from the deep sleep mode in the following cases:

- When the printer receives a print job

- When the Wakeup/Sleep button is pressed

Settings (default in bold):

On, Off

Power Off Timer (Power Off

mode) (AL-M8100 Series only)

When this setting is set to On, the printer automatically turns off at the time specified in the

Time to Off setting. If EU is selected as Region Setting when the printer is turned on

for the first time after you purchase it, the default value is On. If some other region is

selected, the default value is set to Off.

Note:

The printer does not enter the power off mode if it is receiving or sending data.

The printer recovers from the power off mode when the power switch is turned on.

Settings:

On, Off

AL-M8200/AL-M8100/AL-M7100 Series User's Guide

Getting to Know Your Printer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson WorkForce AL-M8200DN Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson WorkForce AL-M8200DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info