Bedienungsanleitung Ergofix 76300 (Seite 12 von 25) (Deutsch, Englisch, Holländisch, Französisch)

621631

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

3. SAFETY INSTRUCTIONS

Regular maintenance will increase durability and reliability.

• Keep the work area clean. Use the bench grinder always in a clean and dry

environment. Do not expose the machine to rain and keep the work area well

lit. Do not use the tool in presence of flammable liquids or gases.

• Keep children away and do not let visitors contact tool or extension cord. All

visitors should be kept away from work area.

• Store idle tools when not in use in a dry and high or locked-up place out of

reach of children.

• Do not force the tool. It will do the job better and safer at the rate for which it

was intended.

• Always use the right tool. Do not force small tool or attachment to do the job

of a heavy duty tool. Do not use the tool for purposes not intented, for

example do not use a circular saw for cutting tree limbs or logs.

• Do not wear loose clothing or jewellery. They can be caught in moving parts.

Rubber gloves and nonskid footwear are recommended when working

outdoors. Wear protective hair covering to contain long hair.

• Always wear safety glasses. If the cutting operation is dusty, it is advisable to

use a face or dust mask.

• Do not overreach. Keep proper footing and balance at all times.

• Maintain the tools with care. Keep the tools sharp and clean for better and

safer performance. Follow the instructions for lubricating and changing

accessories. Inspect the tool cords and extension cords periodically and if

damaged, have them repaired or replaced by an authorised service facility.

Keep handles dry, clean and free from oil and grease.

• Before you turn on the machine, always first check if adjusting keys and

wrenches have been removed from tool.

• Avoid unintentional starting of the machine. Do not carry the tool with your

finger on the switch.

• Stay alert, watch what you are doing and use your common sense. Do not

operate tool when you are tired.

• Check damaged parts. Before further use of the tool, a guard or other part

that is damaged should be carefully checked to determine that it will operate

properly and perform its intended function. Check for alignment of moving

parts, binding of moving parts, breakage of parts, mounting and any other

conditions that may affect its operation. A guard or other part that is damaged

should be properly repaired or replaced by an authorised service centre

unless otherwise indicated elsewhere in this instruction manual. Have

defective switches replaced by an authorised service centre. Do not use tool if

switch does not turn it on and off.

• The use of accessories or attachments other than recommended might

present a hazard. When servicing only use original replacement parts.

• Save these instuctions for future reference.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ergofix 76300 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info