Bedienungsanleitung Ergofix 79576 (Seite 21 von 49) (Deutsch, Englisch, Holländisch, Französisch)

621618

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

ERGOFIX

grounded surfaces (e.g. pipes radiators, rangs, refrigerators).

4. All visitors should be kept away from the work area, especially children.

5. When not in use, tools should be stored in a dry, high or locked up place,

out of reach of children.

6. Do not force small tools or attachments to do the job of heavy duty tools.

Do not use tools for purposes not intended, for example do not use circular

saws to cut three limbs or logs.

7. Do not wear loose clothing or jewelry, they can get caught in moving parts.

Rubber gloves and non-skid footwear are recommended when working

outdoors. Wear protecting hair covering to contain long hair.

8. Use safety glasses. Also use face or dust mask if the cutting operation is

dusty.

9. If devices are provided for the connection of extraction and collection

facilities, ensure these are properly connected and properly used.

10. Do not abuse the cord. Never carry the tool by the cord or yank it to

disconnect it from the socket. Keep the cord away from heat, oil and sharp

edges.

11. Use a clamp or a vice to hold the work piece. It is safer then using your

hand and it frees both hands to operate the tool.

12. Do not overreach. Keep proper footing and balance at all times.

13. Maintain tools with care. Keep cutting tool sharp and clean for better and

safer performance. Inspect extension cords periodically and replace if

damaged. Keep handle dry, clean and free from oil and grease.

14. Disconnect the tools when you are not using the lathe, before servicing

and when you change accessories such as blade, bits and cutters.

15. Remove adjusting keys and wrenches before you turn on the lathe.

16. Avoid unintentional starting. Do not carry a plugged-in tool with a finger on

the switch. Ensure switch is off when plugging in.

17. When tool is used outdoors, use only extension cords intended for outdoor

use.

18. Stay alert. Watch what you are doing, use common sense. Do not operate

tool when you are tired and do not drink alcohol before or during operation.

19. Check damaged parts. Before further use of the tool, a guard or other part

that is damaged should be carefully checked to determine that it will

operate properly and perform its intended function. Check for alignment of

moving parts, free running of moving parts, breakage of parts, mounting

and any other conditions that may affect its operation. Have defective

switches replaced by an authorized service facility. Do not use the tool if

the switch does not turn it on and off.

20. The use of any accessory or attachment, other than those recommended

in this instruction maual, may present a risk of personal injury.

21. Repairs should only be carried out by qualified persons using original spare

parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ergofix 79576 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info