480733
42
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
SIM card memory
You can store read messages on your SIM
card. The number of messages that can be
stored is SIM-dependent. You can retrieve
these messages regardless of which phone you
use. If the SIM card memory is full, you will be
informed of this by a low beep and a text in the
display. You then need to erase read messages
to provide free memory space.
You are prompted when no messages are
stored. The message received/sent/written will
always be presented first.
To store messages
Press YES when you are prompted to save
the message.
The display shows that this message is the third
of five that is possible to store.
To call a phone number in a message
Press YES when a phone number is found
in the display to call the number direct.
After the number has been called, the message
is considered as read and it remains in the
phone’s memory.
To read stored messages
1. Scroll to Read messages in the Mail menu
and press YES.
2. Scroll with / until you find the message
you are looking for and press YES.
A read message is called old, while an unread
message is called new.
3. You may let the message remain in the
memory or erase it.
To read messages
1. Scroll to Card messages in the Mail menu
and press YES.
2. Scroll with / until you find the message
you are looking for and press YES.
3. You may let the message remain in the SIM
memory or erase it.
Own messages
You can write, send, repeat, and change types
of messages as follows.
To send messages
1. Enter the Mail menu.
2. Scroll with / until you find Send
messages and press YES.
3. Press YES when New is in the display, and
an empty display appears.
4. Key in your message and press YES. A
Request for reply prompt appears.
Press YES if you want a reply or NO if you
do not.
5. Enter the phone number or scroll with
/ until you find the phone number of
whom you wish to send a message.
6. Press YES to send the message, or NO to
store the message for later use.
If you decide to send the message later, the
display will say Written instead of Sent when
you access the message.
Advanced Functions
42 EN/LZT 126 1298 R1A
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ericsson GH388 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info