Bedienungsanleitung Ericsson SH888 (Seite 35 von 71) (Englisch)

480744

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Speech then Fax Calls

In some cases, you might want to speak to the receiving

part before starting the fax transmission. This call type

is referred to as a speech then fax call.

Note! This feature must be supported by your network opera-

tor and you may need a separate subscription.

To set up a speech then fax call:

 Connect your computer to the phone, using the

IR port or the RS232 cable.

 Scroll to ‘Speech then FAX’ in the menu system

(the ‘Data menus’ must be turned on) and press

YES. The display will look like the picture in the

margin.

 Enter the receiving part’s number and press YES.

When the call is set up, the display looks like

the picture in the margin. The call is now in

speech mode.

 Use the manual send mode (or similar function)

in your fax software to send the fax.

Receiving Fax and Data Calls

The procedure for receiving fax and data calls depends

on your network and subscription. If you have different

numbers for speech, fax and data calls, this is referred

to as multi numbering. This means that you can have

up to three numbers in your subscription. If you only

have one number for all call types, this is referred to as

single numbering.

Receiving Fax and Data Calls – Multi

Numbering

If your network and subscription support multi

numbering, the SH 888 will display the type of in-

coming call. There are four possible types apart from

speech calls:

• Fax calls

• Data calls

• Speech then fax calls

• Fax then speech calls

The display shows the type of call on the middle row.

To receive a fax or data call:

 Connect your computer to the phone.

 Answer the call from within the software appli-

cation (if it does not answer automatically).

To receive a speech then fax call:

 Answer the call.

 Connect your computer to the phone.

 Receive the fax from within the software appli-

cation.

To receive a fax then speech call:

 Connect your computer to the phone.

 Answer the call from within the software appli-

cation (if it does not answer automatically).

 After receiving the fax, pick up the phone and

continue the speech call.

Receiving Fax and Data Calls – Single

Numbering

If your network and subscription only support single

numbering, the phone does not recognize the type of

incoming call. This means that the calling part has to

tell you if you are going to receive a fax or data call.

Do the following to prepare your phone for a certain

type of call:

 In the menu system, scroll to ‘Next call type’

(the ‘Data menus’ must be turned on) and press

YES.

 Select the type of call you are going to receive.

• If you select ‘Speech’, the next call will be

handled as a speech call.

Press to enter the menu system. See inside the cover. 31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ericsson SH888 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info