Bedienungsanleitung Espressione 26160 - 3 in 1 (Seite 6 von 54) (Englisch, Französisch, Portugiesisch, Spanisch)

505377

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

PRELIMINARY USE STAGES

Operation

Make sure that the domestic mains voltage is the same as that on the appliance rating plate. Place the

machine on a ﬂ at surface.

Open the tank cover (7).

Fill the tank with tap water (max. 15° hardness) (Fig. 3).

NEVER ﬁ ll the tank above the MAX level.

Plug the appliance into the mains socket, which must be earthed.

First Use

Before using the appliance for the ﬁ rst time and also after a long period of non-use,

prepare several cups of water (without any coffee) to rinse the system through com-

pletely:

To rinse the Espresso and cappuccino maker

• Place one of the three ﬁ lters in the ﬁ lter holder (22)

• Tighten the ﬁ lter holder on the left facing the external marking and turn it ﬁ rmly to the right

• Place a large enough container under the ﬁ lter holder.

• Turn steam control knob (12) to close position ‘●’

• Press “1cup/2cups” button on (I), then continue to press “ESPRESSO” button (L).

So the pump is then activated. If the boiler tank (water heating system) is empty (on ﬁ rst use for

example) it will ﬁ ll with water with a characteristic ﬁ lling noise.

As soon as the water is running out of the ﬁ lter holder, press “ESPRESSO” button (L) off.

• Allow the appliance to ﬁ nish heating the water.

• Once the “ESPRESSO” light, (L) is off, press “ESPRESSO” button (L) again, allow 1 cup (green light)

water to run through button (I).

Repeat the action and pour the equivalent of two cups of water, pressing the button (I) (red light) and

three cups of water pressing the button (I) (blue light), interchanging the three ﬁ lters every time.

Important!

After pouring coffee, wait at least ten seconds before disengaging the ﬁ lter holder, turn it slowly to

from right to left, to prevent sprays or splashes of water or coffee.

Important!

Like on professional coffee machines, never remove the ﬁ lter holder when the machine is opera-

ting; scalding hazard!

• Interrupt each time the process by pressing “ESPRESSO” button again.

To rinse the steam wand

• Place a container under the steam wand (13)

• Turn the steam control knob to ‘ ’ position

• As soon as the “ESPRESSO” light is off, slowly turn the steam control knob (12) to ‘MAX’ direction and

allow the steam to escape for about 10 seconds.

• Turn steam control knob (12) to close position’’●’

• Press “1cup/2cups” button (I) until the lit indicator switches off.

Important!

During the steam dispensing stage, never touch the surface of the steam wand, as they are very

hot. Danger of scalding.

It is also necessary to use containers in a material suitable for high temperatures (ceramic or

steel).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Espressione 26160 - 3 in 1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info