Bedienungsanleitung ESQ Movado Watches (Seite 15 von 20) (Englisch)

757303

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

NOTE: Be sure to take AM/PM into account when

setting time.

6. Push crown back in to position 1. (Watch restarts.)

CHRONOGRAPH FUNCTIONS

Overview

Use buttons A and B to operate the chronograph.

Pressing button A the ﬁrst time will start the chrono-

graph. Pressing button A a second time will stop the

chronograph, allowing elapsed time to be read.

Pressing button A a third time will restart the chrono-

graph. Pressing button B will reset chronograph hands

C, E and F to zero. Adjusting the time does not stop

the chronograph, but it does block buttons A and B for

as long as the crown is pulled out.

NOTE: Crown must be in position 1 and hands must

be at zero before chronograph is started. Press button

B to reset hands to zero.

IMPORTANT: Do not push button A or B when

crown is pulled out to position 2 or 3. If button A or

B is accidentally activated while crown is not ﬂush

against case, one or more of the chronograph hands

may become de-synchronized. Should this occur,

follow instructions at end for synchronizing

chronograph hands.

Simple chronograph functions:

To measure the duration of a single, non-stop event:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph,

and read the 3 chronograph hands to determine

elapsed time, for example: 1 hour, 8 minutes, 47

seconds.

3. Press button B to reset chronograph hands to zero.

Accumulated time functions:

To measure the combined time of a series of shorter

events, for example the actual playing time of a

football game, where play is repeatedly interrupted:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph

and read elapsed time, for example: 15 minutes,

22 seconds.

3. Press button A again to resume measurement.

4. Press button A a fourth time to stop chronograph

again, and read new elapsed time, for example:

28 minutes, 35 seconds.

NOTE: Each time you stop chronograph, chronograph

hands will indicate total accumulated time.

5. Repeat steps 1 and 2 to add each additional

interval of time.

6. After you have taken your ﬁnal accumulated time

reading, press button B to reset chronograph hands

to zero.

Split-time or intermediate-time functions:

To take intermediate time readings as a race progresses:

1. Press button A to start chronograph.

2. Press button B to momentarily stop chronograph.

3. Read off the intermediate time, for example:

11 minutes, 16 seconds.

4. Press button B to resume chronograph function.

The 3 chronograph hands will quickly catch up

with ongoing event.

5. To read a second split time, press button B again.

Repeat steps 2 through 4 to take any additional

split times.

6. Press button A to stop chronograph.

7. Take a reading of the ﬁnal time, for example:

2 hours, 14 minutes, 7 seconds.

8. Press button B to reset chronograph hands to zero.

Synchronizing chronograph hands:

After a battery change or in the event of an error,

you may need to manually adjust one or more of the

chronograph hands to align them all correctly at their

zero positions.

NOTES: Once in corrective mode, each press and

release on push-button A will advance active chrono-

1/10 QUARTZ CHRONOGRAPH

(continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ESQ Movado Watches Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ESQ Movado Watches

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info