Bedienungsanleitung Esscom FIDELITY 1150 (Seite 2 von 48) (Deutsch, Englisch, Holländisch, Französisch)

523753

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

1 2 3

16 17 18

4 5

26 27 28

29 31 30

2 Esscom Fidelity 1150

Esscom Fidelity 1150

1 Before Initial use

Thank you for purchasing this new desktop caller

ID telephone.

1.1 Intended Purpose

This product is intend to be connected indoor to

an analogue PSTN telephone line.

1.2 Caller ID

1.3 Connection

This device has been designed and manufactured

to comply with the 98/482/EC rule, referent to the

Pan European connection of a terminal to the

Public Switching Telephone Network (PSTN) and

following the established guidelines by the 1999/

5/EC Directive about radio electric equipments

and the reciprocal acknowledge of their conformi-

ty. However, due to the fact that there are some

differences in the PSTNs from one country to an-

other, the verifying measurements by themselves

do not set up an unconditional guarantee for an

optimal working in every connection point to the

PSTN of any country .If any problem comes up,

get in touch firstly with the distributor.

In any case, use conditions for which the product

has been created should be respected as well as

avoid its use in public or private networks with

technical requirements clearly different to those

established in the EU.

2 Safety instructions

• Do not place the basic unit in a damp room or

at a distance of less than 1.5 m away from a

water source. Keep water away from the

telephone.

• Do not use the telephone in environments

where there is a risk of explosions.

• Dispose of the batteries and maintain the

telephone in an environment-friendly manner.

3 Cleaning

Clean the telephone with a slightly damp cloth or

with an anti-static cloth. Never use cleaning

agents or abrasive solvents.

4 Disposal of the device

(environment)

At the end of the product lifecycle,

you should not throw this product

into the normal household garbage

but bring the product to a collection

point for the recycling of electrical

and electronic equipments. The

symbol on the product, user guide and/or box in-

dicate this.

Some of the product materials can be re-used if

you bring them to a recycling point. By re-using

some parts or raw materials from used products

you make an important contribution to the protec-

tion of the environment.

Please contact your local authorities in case you

need more information on the collection points in

your area.

To use ‘Caller ID’ (display caller), this

service has to be activated on your

phone line. Normally you need a separate

subscription from your telephone

company to activate this function. If you

don’t have the Caller ID function on your

phone line, the incoming telephone

numbers will NOT be shown on the

display of your telephone.

The CE symbol indicates that the unit

complies with the essential

requirements of the R&TTE directive.

Please read carefully through the

following information concerning safety

and proper use. Make yourself familiar

with all the functions of the equipment.

Be careful to keep these advice notes

and if necessary pass them on to a third

party.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Esscom FIDELITY 1150 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info