Bedienungsanleitung Esylux MD-C serie (Seite 2 von 3) (Englisch)

820911

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

2 / 3

DIP switch 4

Maximum sensitivity (default setting)

Reduced sensitivity = optional masking of interference sources

Despite careful planning and positioning, interference sources

can still cause undesired switching, such as local hot air streams

from heaters or underfloor heating; ventilators, air-conditioning

units, fans, lights, TVs and HiFis, or computers.

NB: If reducing the sensitivity does not manage to mask the

interference source completely, you can also mask out individual

areas of detectors by means of the enclosed covering clips / lens

mask. Alternatively you will need to re-position the detector.

5.3 Additional manual control by button

5.3.1 “lighting” channel

The detectors have a separate “S” terminal for connecting an external button (button –

operating current – with zero conductor connection). This means that the detector can be

manually overridden at any time so that the “lighting-C1” channel can be switched on or off

individually.

Manual switch-on: The lighting will remain switched on for as long as the detector continues

to detect movement. If movement is no longer detected, the lighting will switch off and the

detector will revert to the set operating mode once the set time has elapsed.

Manual switch-off: The lighting will remain switched off for as long as the detector continues

to detect movement. If movement is no longer detected, the detector will revert to the set

operating mode once the set time has elapsed.

The button function can also be set as follows:

DIP switch 3

“Room” button function – manual switch-on and switch-off (default setting)

“Hallway” button function – manual switch-on only

Manual switch-off not possible, safety function for pathway and

hallway lighting

5.5. Control: acoustic sensor (MD-C 360i/8 MIC + PD-C 360i/8 MIC)

The acoustic sensor can only be adjusted manually using the control.

• Turning all the way to the left (-) deactivates the sensor

• Turning all the way to the right (+) maximises sensitivity

The acoustic sensor will only be enabled if the detector is activated first, either by

movement or by switching on manually (button or remote control). This stops noises from

outside the monitored area affecting operation.

Automatic switch-off: if movement or noise is no longer detected, the lighting will be

switched off once the set time has elapsed. The lighting can be immediately re-activated,

e.g. by calling out (making a noise), within 8 seconds. The acoustic sensor should be

adjusted to take into account the surrounding area (noise from nearby HiFis or TVs could

trigger the sensor, for instance). The green LED indicates the acoustic sensor’s response.

6 • DISPOSAL / WARRANTY

This device must not be disposed of as unsorted residual waste. Owners are

required by law to correctly dispose of used devices. More information is

available from your local town council.

ESYLUX manufacturer's warranty at www.esylux.com. Technical and design features may

be subject to change. Technical data for products at www.esylux.com/products.

5.4 Sensitivity adjustment

DIP switch 2 Toggle between “fully automatic and semiautomatic operation”

Fully automatic mode – “lighting” switching channel – see 4.1

Semiautomatic mode – only for “lighting” switching channel

Manual switch-on: The detectors have a separate “S” terminal for

connecting an external button (button – operating current – with

zero conductor connection). This means that the detector can

be manually overridden at any time so that the lighting can be

switched on or off individually.

Automatic switch-off: If movement is no longer detected, the

lighting will be switched off once the set time has elapsed.

MD-C 360i/8

MD-C 360i/24

MD-C 360i/32

MD-C 360i/32 Corridor MD-C 360i/8 MIC

PD-C 360i/8

PD-C 360i/24

PD-C 360i/32

PD-C 360i/32 Corridor PD-C 360i/8 MIC

PD-C 360i/8 plus

PD-C 360i/24 plus

PD-C 360i/32 plus PD-C 360i/24 Dry

230 V ~ / 50 - 60 Hz

Power consumption in W 0,3 0,3 0,3 0,3 0,3 0,3

Field of detection 360°

Range (diameter in m)

Settings on device or via remote control Mobil-PDi/MDi

Light value approx. 5 lux - 2000 lux / daytime operation

“Lighting” channel

Switching capacity: 2300 W / 10 A (cos φ = 1),

1150 VA / 5 A (cos φ = 0.5), capacitive load / electronic

ballasts *

–

Switching capacity: floating / NC, 230 V ~ / 5 A,

24 V / 5 A, capacitive load / electronic ballasts *– – – – – 2x

In-built acoustic sensor –– – –

Time setting: impulse / 1 min. - 30 min.

Switch input – lighting

“HVAC” channel

Switching capacity: floating / NO, 230 V ~ / 2 A,

24 V / 2 A, capacitive load / electronic ballasts *– – – – –

Time setting: impulse / 5 min. - 120 min. – – – – –

Slave connection: PD-C 360/8 Slave, PD-C 360/24 Slave,

PD-C 360/32 Slave – –

Protection type: recessed-mounted IP 20,

IP 20 / IP 54 with surface-mounted box (accessory),

ceiling-mounted IP 20 (accessory)

Protection class II II II II II II

Operating temperature range -25 °C ... +50 °C

Colour: white, similar to RAL 9010

* inrush limiter required

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Esylux MD-C serie Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Esylux MD-C serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info