Bedienungsanleitung Etherma Lava (Seite 5 von 13) (Englisch)

668738

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

INSTALLATION AND USAGE INSTRUCTION FOR

THE ELECTRICIAN

IMPORTANT NOTES:

• Installation and service work must be carried out by a

licensed professional or a qualied person. Verify that the

electrical installation complies with the applicable local

codes. The responsibility of the manufacturer is limited to

the supply of the device.

• The devices are designed for wall mounting (vertical or

horizontal)

• Wall mounting of the glass radiators corresponds IP24

Protection.

• When installing the unit in a bathroom, follow local

building and electric code regulations.

• Specied minimum distances must be respected.

INSTALLATION AND MINIMUM DISTANCES:

LAVA® glass heaters may be mounted horizontally or

vertically on the wall. They must be positioned so that

ammable items can not be ignited. Ensure that the

required minimum distances, particularly to ammable

objects like curtains, and upholstered furniture are correct.

Please make sure that the glass radiator can radiate freely

into open space. (See Fig. 2)

ATTENTION: Don’t lean items against the glass or lean the

radiator against other objects.

ASSEMBLY OF THE RADIATOR:

Please verify that no shipping or handling damage occured

before installing the power cable to the radiator.

WALL MOUNTING:

The mounting brackets (supplied) have 3 groups of 2 holes

spaced at 8” on center. This spacing allows the installer

exibility when choosing a mounting location. Please note

the required minimum clearance distances from ammable

materials (SEE Fig 2) when choosing your mounting

location. Ideally, if the studs in the room are 16” on center,

this bracket will allow the unit to be attached to at least one

stud and optimally 2 studs. This bracket design also allows

for the Lava to be mounted horizontally or vertically.

At this time, gather any needed items including a pencil,

screw driver, screws, washers, hammer, tape measure,

stud nder, wall anchors, and an assistant. Verify correct

number of supplied parts are present.

Choose a location desired for mounting. Choose an area in

compliance with local building and electrical codes.

Use a stud nder to locate the studs present in the area. If

possible, choose a location where 4 screws on each bracket

will land in studs. If this is not possible, we suggest at

least 2 of the screws on each bracket land in a stud. Use

Heavy-duty anchors rated to 50 lbs. for this application. If

mounting into concrete or other materials, use appropriate

anchors suitable for that application. We require using

at least 4 (six is even better!) screws in each mounting

bracket. PLEASE VERIFY ACCESS TO ELECTRICAL BOX IS

NOT BLOCKED BY INSTALLED MOUNTING BRACKET.

Use a level and a pencil to mark the location of the rst

bracket on the wall. Using the bracket, mark the hole

locations. Drill and install the appropriate screws and/or

anchors. We recommend Cobra, TripleGrip #8, p/n: 178S

(available at Home Depot) or similar type anchors. We

recommend using a #8 screw with washer (if needed),

minimum, for mounting the mounting brackets.

Make corresponding marks 17 9/16” below the installed

bracket for the lower bracket. ALWAYS INSTALL 2

BRACKETS per LAVA unit! Follow above instructions for

this bracket.

Once the brackets are installed on the wall, install the 4, M8

x 16 hex mounting bolts loosely (at least 3 revolutions) into

the Lava.

With the assistance of a helper, lift the Lava and make

your electrical connections. Place the mounted bolts into

the slots of the mounting brackets. If the unit is placed

satisfactorily, use an open-ended wrench to fully snug the

bolts, securing the Lava to the mounting products.

Installation and Usage Instruction | LAVA® Design Glass Radiator

Fig. 2: Minimum mounting distances

11.8” / 300mm

7.8” / 200mm

11.8” / 300mm 11.8” / 300mm

18.9”/ 48cm 18.9”/ 48cm

13.8”/ 35cm

29.5”/ 74.9cm

45.2”/ 114.8cm

57”/ 144.7cm

18.9”/ 48cm 18.9”/ 48cm

LAVA 250 LAVA 500 LAVA 750 LAVA 1000

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Etherma Lava Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Etherma Lava

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info