Bedienungsanleitung Etna 1424 VT WT (Seite 47 von 50) (Deutsch, Englisch, Holländisch, Französisch)

71148

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

dition. The hose must be replaced at the

latest at the indicated date and must be

secured at both ends using a standard hose

clamp.

- If taps become stiff to operate over time,

contact the After-Sales service.

- Wash enamelled or chrome-plated parts

with soapy lukewarm water or non-abrasive

detergents. A metal brush may be used

to remove deposits from hob burners and

ﬂ ame caps. Dry thoroughly.

- Never use abrasives to clean enamelled or

chrome-plated parts.

- Do not use too much water when washing

the hob. Take care that no water or other

substances enter the burner housing holes,

as this may be dangerous.

- The spark plugs for electric ignition must

be kept clean and dry; always check after

use, particularly if there have been drips or

overﬂ ows from pans.

- Never close glass lids until the hob burn-

ers or hotplates have cooled completely; it

might shatter or crack.

- Never knock enamelled parts or ignition

spark plugs (where present).

- The main or wall gas tap should be turned

off when the cooker is not in use.

- Never lift the cooker by taking hold of the

oven door handle.

No liability is accepted for injury or damage

caused by poor installation or improper use

of the cooker.

In case of malfunctions, particularly gas

leaks or short-circuits, contact your en-

gineer without delay

For the user

EUROPEAN DIRECTIVE 2002/96/EC

(WEEE): INFORMATION FOR THE CON-

SUMER

Fig. A

This information is strictly addressed to those

who have a product showing the symbol be-

low (Fig.A). This symbol is indicated on the

technical data sticker (rating label) placed on

the product itself

This symbol indicates that the appliance is

considered as Waste Electrical and Elec-

tronic Equipment and complies with the

European directive 2002/96/EC (WEEE).

Therefore this product is not to be treated as

household waste. Instead it shall be handed

over to the applicable collection point for the

recycling of electrical and electronic equip-

ment or it can be handed back to the retailer

when you want to purchase a new equivalent

product.

The consumer is responsible for a correct

disposal of the product towards an appropri-

ate collection point. Otherwise the consumer

can be exposed to a penalty sanction by

laws in force for waste disposal. Appropri-

ate separate waste collection followed by

recycling the product, the treatment and

compatible environmental disposal contrib-

utes to avoid negative effects towards the

environment and health and helps to recycle

material which the product is composed

of.For more detailed information regarding

the available waste collection systems of this

product please contact your local city ofﬁ ce

or contact the retailer where the product was

purchased.The manufacturers and importers

will obey to their responsibility for recycling,

treatment and compatible environmental

disposal by participating directly and through

a joint cooperative system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Etna 1424 VT WT Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info