Bedienungsanleitung Etna EVW7860 (Seite 27 von 31) (Holländisch)

461450

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

How to keep your dishwasher in shape

About the electrical connection

Electrical requirements

This dishwasher is designed for connection to 220-240 V - 50 Hz, with a fuse of 16 Amp.

WARNING!

Make sure the electrical socket is earthed before connecting the appliance.

Electrical connection

After making sure that the voltage and the frequency values for the current in the home correspond to those on the rating plate, insert

the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, please consult the manufacturer or its service agent or a similarly qualified person.

Cold water connection

Connect the cold water supply hose to a threaded (

⁄4 inch) connector and make sure that it is fastened tightly in place.

If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear

and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot water connection

The dishwasher is not suitable for hot water connection.

Positioning the appliance

■ After every wash

After every wash, turn off the water supply to the appliance

and leave the door slightly ajar so that moisture and odors

are not trapped inside.

■ Remove the plug

Before cleaning or performing maintenance, always remove

the plug from the socket. Do not run risks.

■ No solvents or abrasive cleaning

To clean the exterior and rubber parts of the dishwasher, do

not use solvents or abrasive cleaning products. Rather, use

only a cloth and warm soapy water.To remove spots or stains

from the surface of the interior, use a cloth dampened with

water and a little white vinegar, or a cleaning product made

specifically for dishwashers.

■ When you go on holiday

When you go on holiday, it is recommened that you run a

wash cycle with the dishwasher empty and then remove the

plug from the socket, turn off the water supply and leave the

door of the appliance slightly ajar.This will help the seals last

longer and prevent odors from forming within the appliance.

■ Moving the appliance

If the appliance must be moved, try to keep it in the vertical

position. If absolutely necessary, it can be positioned on its

back.

■ Seals

One of the factors that cause odors to form in the dishwasher

is food that remains trapped in the seals. Periodic cleaning

with a damp sponge will prevent this from occurring.

CAUTION! for personal safety:

DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD.

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the

adjacent cabinets or wall.The dishwasher is equipped with water supply and drain hoses that can be positioned to the right

or the left to facilitate proper installation.

700003352000 Hl_EVW7860_NL_GB.qxd 25-01-2010 14:57 Pagina 25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Etna EVW7860 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info