667412
43
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
EN 15
Programming the end of the baking time
1. Select a temperature with the temperature knob and an oven function with the function
knob.
The thermostat light for the oven lights up and the oven is switched on.
2. Press the ‘mode’ key until ‘End’ appears in the display.
The display will now alternate between ‘End’ and the earliest possible end time and the ‘A
flashes.
3. Use the + and - keys to set the desired end time (while the ‘A’ is flashing).
4. Now wait 5 seconds; the set time is confirmed automatically.
The time of day appears in the display again and the ‘A’ stops flashing. The oven sounds a
signal when the end time has been reached. The ‘A’ starts flashing and the oven switches off
automatically.
5. After the cooking time has elapsed, first turn the temperature knob and the function knob to
‘0’. Then press any key to switch off the alarm signal.
Programming the automatic baking process
You can program the oven to turn on and off automatically by setting a duration and end time.
The oven will calculate the start time and switch off automatically after the end of the cooking
time.
Example:
Current time: 17:30,
the set duration of the baking process: 1 hour and 15 minutes,
the set end time of the baking process: 19:45.
The oven will start the baking process at 18:30 with the preset temperature and function
and will stop at 19:45.
1. Press the ‘mode’ key until ‘dur’ appears in the display.
The display will now alternate between ‘dur’ and ‘0·00’ and the ‘A’ flashes.
2. Use the + and - keys (while the ‘A’ is flashing) to set the correct duration.
3. Press the ‘mode’ key until ‘End’ appears in the display.
The display will now alternate between ‘End’ and the earliest possible end time and the ‘A
flashes.
4. Use the + and - keys to set the desired end time (while the ‘A’ is flashing).
The cooking symbol disappears.
5. Now wait 5 seconds; the set time is confirmed automatically.
The time of day appears in the display again and the ‘A’ stops flashing.
OPERATION
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Etna FIV760WIT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Etna FIV760WIT

Etna FIV760WIT Bedienungsanleitung - Deutsch - 60 seiten

Etna FIV760WIT Zusatzinformation - Holländisch - 2 seiten

Etna FIV760WIT Bedienungsanleitung - Französisch - 60 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info