Bedienungsanleitung Eufab 11233 (Seite 6 von 12) (Deutsch, Englisch, Französisch, Italienisch)

807222

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Operating instructions

1 Lockable knob nut

2 Spacer

3 Frame clip

4 Lock screw M8

5 Tube

6 U-bracket cu

7 Plug

8 Rubber inserts Ø 25 mm and Ø 30 mm

Mounting the frame holder

Before you can use the lockable frame holder, you must rst dismantle it. First unscrew the knob nut. Now remove the spacer and the frame

clip. Place the thread of the lock screw onto a rm surface and carefully push the tube in the direction of the surface. The screw head will now

push the plug out of the U-bracket cu. Pull the lock screw out completely. Wrap the appropriate rubber insert for your bicycle rack around the

U-bracket at a suitable position for your bicycle. Open the bracket cu and place it around the rubber insert. Push the bracket cu to close. The

rubber insert may not be folded or crushed as you do so. Replace the lock screw. First t the frame clip and then the spacer onto the threaded

end of the lock screw. The curved side of the spacer must face the frame clip. Push the frame clip together and push in the direction of the bra-

cket cu to expose sucient thread of the lock screw. Now put the knob nut onto the thread and then tighten securely to ensure that all parts

are tted and brought together. Insert the plug back into the top of the bracket cu.

Securing a bicycle using the frame holder

Rotate the knob nut anti-clockwise until the frame clip has opened suciently to accommodate the bicycle frame. Insert the bicycle frame

into the frame clip. Rotate the knob nut clockwise until the frame clip loosely encompasses the bicycle frame. Align the bicycle and the frame

holder to ensure that it all ts together. Now tighten the knob nut rmly.

You can only lock the frame holder when it has been closed securely.

Insert the key into the lock of the knob nut and turn so that the red marking faces the lock icon. Remove the key. Your bicycle is now secured to

prevent theft.

CAUTION: Before travelling, you must rst secure the bicycle in accordance with the instructions of your bicycle rack (tensioning

straps, safety strap etc.)

Maintenance and care

Clean the frame holder using a slightly moist, soft cloth and a mild cleaning agent. Do not use aggressive cleaning agents, solvents or petrol.

Ensure that no cleaning agents or liquids enter the tube of the frame holder.

Occasionally lubricate the lock with a resin-free oil, e.g. WD40.

Store the frame holder in a dry place.

Notes regarding environmental protection

Please dispose of this device via the recycling bin or the public/municipal collection points.

The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisation or other

forms of reusing waste equipment!

Contact information

EAL GmbH

Otto-Hausmann-Ring 107

42115 Wuppertal

Germany

Telephone: +49 (0)202 42 92 83 0

Fax: +49 (0)202 42 92 83 160

Internet: www.eal-vertrieb.com

Email: info@eal-vertrieb.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufab 11233 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info