Bedienungsanleitung Eufab 11417 - James (Seite 12 von 24) (Deutsch, Englisch, Französisch, Italienisch)

807233

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

When the rack can no longer be rotated on the trailer tow bar, rotate the

securing bolt of the quick locking mechanism until it engages. Now close

the quick locking mechanism with the supplied padlock and remove the key

from the lock. Store the key carefully and in a safe place. The bicycle rack is

now secured to prevent theft.

Regularly check the  rm seating of the rack on the trailer tow bar as well

as the attachment of the bicycles to the rack. Also regularly check the

functions of the lighting system of your bicycle rack.

Always make sure that the lock nut on the adjusting

screw is correctly tightened!

The front wheel must also be secured to prevent it

from turning using a small tensioning strap. To do this,

secure the front wheel to the rail again at a di erent

position.

Slight signs of pressure on the two bar ball are normal

and do not in uence the functionality.

CAUTION

2 x Tensioning strap, small

1 x Safety strap

The  rst bicycle is placed in the  rst wheel rail (closest to the vehicle) and

secured to the U-tube with the short frame holder. To do this, turn the knob

nut anti-clockwise until the frame clips are su ciently widely opened to

 t your bicycle frame. Place the frame clips around the bicycle frame and

then turn the knob nut in a clockwise direction. The wheels are secured by

pushing the wheel stopper up to the wheel, placing the tensioning straps

around the wheel rim of your bicycle and tightening the straps.

The second bicycle is usually placed in the second rail, facing the opposite

direction to the  rst and secured to the U-bracket with the long frame hol-

der. The wheels are secured in the same way as for the  rst bicycle. It may be

necessary to o set the individual bicycles di erently on the rack to ensure

that the frame holders may be correctly secured. Now secure the bicycles

with the long safety strap. Wrap the safety strap through the bicycle frames

and the U-shaped bar and tighten.

5.3 MOUNTING THE BICYCLES TO THE RACK

The bicycle rack may not be used without this safety

strap.

First remove the padlock.

5.4 FOLDING OUT THE BICYCLE RACK

6. MAINTENANCE AND CARE

• After use, store the bicycle rack in a clean and dry place. Wash any mud or

other dirt o using water.

• Keep the trailer coupling clean and free of grease

• Keep the rack tow bar clean and free of grease.

• Check the bicycle rack regularly for damages. Damaged or worn parts

must be replaced immediately. Only original replacement parts may be

used.

• Check the bolts and nuts of the bicycle rack regularly and tighten when

necessary.

• Immediately treat any damage to paintwork with paint.

• Regularly lubricate rotating and moving parts.

7. NOTES FOR ENVIRONMENTAL PROTECTION

8. CONTACT INFORMATION

Due to its lighting system, the bicycle carrier is an electrical

device. Do not dispose of electrical appliances in household

waste! Discarded electrical and electronic equipment must

be collected separately and recycled in an environmentally

sound manner. Contact your municipal or city government

on how to dispose of old electronic equipment. The materials

are recyclable. You are making an important contribution

to protecting our environment through recycling, material

recycling or other forms of re-utilising old appliances!

Dispose of the bicycle rack in accordance with the laws and

conditions in your country.

If you wish to operate the folding mechanism, always hold the

U-tube with one hand to ensure that the rack is not able to

fold out suddenly. With the other hand, push the lever of the

folding mechanism down. Now you can fold the rack down

carefully. Raising the rack platform engages it back into the

transport position. To secure the folding mechanism during

travel, hook the second padlock into one of the drilled holes

of the folding mechanism.

EAL GmbH

Otto-Hausmann-Ring 107

42115 Wuppertal, Germany

+49 (0)202 42 92 83 0

+49 (0) 202 42 92 83 – 160

info@eal-vertrieb.com

www.eal-vertrieb.com

Safety strap

horizontal position).

Check whether the bike rack is securely and  rmly positioned on the

trailer tow bar and can no longer be rotated. If this is not the case, the quick

locking mechanism must be readjusted. Lift the lever and remove the rack

from the trailer tow bar. Remove the protective cap of the adjusting screw.

Undo the lock nut of the

adjusting screw and rotate the adjusting screw on the quick locking

mechanism tighter by a quarter turn.

Then tighten the lock nut again.

Replace the rack back on the trailer tow bar and check whether the rack

is securely and  rmly positioned on the tow bar. Repeat the adjustment

process until the rack is secure and  rm. Push the protective cap back onto

the adjustment screw.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufab 11417 - James Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info