Bedienungsanleitung Eufab 11569 - Crow Basic (Seite 7 von 20) (Deutsch, Englisch, Französisch, Italienisch)

807226

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

CONTENT

This bicycle rack is mounted to the trailer tow bar of a car and is

designed for the transportation of two bicycles.

This device is not designed to be used by children or persons with

limited mental abilities or without experience and/or lack of

required specialist knowledge. Keep children away from the device.

The device is not designated for commercial use.

Use according to the intended purpose also includes the observance

of all information in these operating instructions, particularly the

observance of the safety notes. Any other utilisation is considered

to be contrary to the intended purpose and may lead to material

damage or personal injuries. EAL GmbH assumes no liability for

damage resulting from improper use.

1. PROPER USE OF THE PRODUCT

2. SCOPE OF DELIVERY

• The trailer tow bar must be approved in its construction.

• Ball and ball rod must have been forged in one piece.

• Mount the bicycle rack only on a coupling made of steel St52-3,

grey cast iron GGG52 or better.

• Unsuitable ball rods made of GGG40.

• The D-value of the tow bar ball must be at least 7.6 kN

• Never mount the carrier on a coupling made of aluminium, other

light metals or plastic.

• These are manufactured e.g. by Westfalia for the following vehicles:

3.1 COUPLING REQUIREMENTS

4. SAFETY PRECAUTIONS

• The warning triangle indicates all instructions which

are important for safety. Always follow these other-

wise you could injure yourself or damage the device.

• Children may not play with the device.

• Cleaning and user maintenance may not be carried

out by children without supervision.

• Do not treat packaging material carelessly. This may

become a dangerous plaything for a child!

• Only use this product for its designated purpose!

• Do not manipulate or disassemble the device!

• For your own safety, only use accessories

and spare parts that are stated in these ins-

tructions or that are recommended by the

manufacturer!

WARNING

Please read the operating instructions carefully

prior to use and observe all safety instructions!

Not observing such may lead to personal injury,

damage to the device or to your property!

Store the original packaging, the receipt and

these instructions so that they may be consulted

at a later date! When passing on the product,

please include these operating instructions as

well.

Please check the contents of package for integrity

and completeness prior to use!

1 x Bicycle rack, assembled

1 x U-shaped bracket with

two frame holders

2 x Knob nut M8

2 x Lock screw M8 x 60

2 x Washer M8

1 x License plate holder

1 x Hexagonal screw M16 x 1.5 x 90

6 x Short tensioning straps

1 x Safety strap

1 x Installation wrench

1 x Operating instructions

1 x Installation wrench

Personal injury or property damage due to changed vehicle

driving characteristics.

• Driving with the mounted bicycle rack will a ect the driving

characteristics of your vehicle.

• Adjust your speed to the new driving characteristics.

• Never drive faster than 130 km/h.

• Avoid sudden and jerky steering operations.

• Remember that your vehicle is longer than usual.

Personal injury or property damage due to loss of the bicycle.

• Driving without the safety strap can lead to accidents.

• Before embarking on any journey, check the correct and  rm

seating of the safety strap around the bicycles and U-shaped

bracket of the rack.

• Before embarking on any journey check the correct and  rm

seating of both straps around the front wheel and the strap around

the rear wheel of the bicycles.

• If necessary tighten the straps again.

1. PROPER USE OF THE PRODUCT ________________ 7

2. SCOPE OF DELIVERY ______________________ 7

3. SPECIFICATIONS _________________________ 7

3.1 COUPLING REQUIREMENTS __________________ 7

4. SAFETY PRECAUTIONS _____________________ 7

5. OPERATING INSTRUCTIONS __________________ 8

5.1 COMPLETING THE BICYCLE RACK _______________ 8

5.1.1 MOUNTING THE USHAPED BRACKET ____________ 8

5.1.2 MOUNTING THE LICENSE PLATE HOLDER __________ 9

5.2 DISMANTLING THE BICYCLE RACK ______________ 9

5.3 MOUNTING THE BICYCLE RACK ON THE TRAILER TOW BAR 9

5.4 MOUNTING THE SHORT TENSIONING STRAPS _______ 10

5.5 MOUNTING THE BICYCLES TO THE REAR RACK _______ 10

5.6 OLDING UP THE BICYCLE RACK ________________ 10

6. MAINTENANCE AND CARE ___________________ 10

7. NOTES REGARDING ENVIRONMENTAL PROTECTION ___ 10

8. CONTACT INFORMATION ____________________ 10

Bicycle rack CROW BASIC for trailer tow bar

Observe the speci cations from the tow bar manufacturer on your

type plate. If in doubt, ask the manufacturer of your trailer hitch

directly whether it is suitable.

3. SPECIFICATIONS

Dimensions (L x W x H): 52 x 117 x 67 [cm]

Folded: 69 x 71 x 19 [cm]

Electrical connection: 13-polig

D-value: 7.6 Kn

Weight: 12 kg

Payload: 50 kg

Max. bike weight: 25 kg

Permitted top speed: 130 km/h

Manufacturer Test symbol Suitable for

Westfalia F 4192 Audi A4

F 3830 Audi A6

F 4112 Audi A8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufab 11569 - Crow Basic Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info