Bedienungsanleitung Eufab 11602 PROBC3 (Seite 24 von 52) (Deutsch, Englisch, Französisch, Italienisch)

807579

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

• Before setting o, check the correct and rm positioning of

the safety strap around the bicycles and U-shaped bracket of

the carrier (Figure 28).

• Before embarking on any journey, check the correct and rm

positioning of both straps around the front wheel and the

strap around the back wheel of the bicycle.

• If necessary tighten the straps again.

• Before embarking on any journey, check to make sure the

straps used are undamaged and not worn.

• Damaged or worn straps must be replaced with undama-

ged ones before you embark on your journey. Only straps

authorised by EAL GmbH for this purpose may be used.

WARNING!

Personal injury or property damage due to loss of

bicycles.

Driving without the safety strap can lead to accidents. The

bicycle carrier may not be used without this safety strap.

• Check that the bicycles are securely and fully mounted.

• If one of the fastenings is loose, repeat the steps shown in

Figures 20 to 28.

WARNING!

Personal injury or material damage due to loss of a

bicycle while driving.

A loose connection between the bicycle carrier and the bicycle

can lead to the detachment of the connection and loss of the

bicycle.

NOTE

The frame holder may result in minor pressure points on the

bicycle frame and damaged to the paintwork. Protect the

bicycle frame, for example, using protective lm

Figure 28: Applying the safety strap

Always use the tensioning straps (position C in the scope

of delivery) for additional fastening of the front wheels to

prevent the bicycle handlebars from twisting.

For bicycle carrier PROBC3, FG3

For the third bicycle, proceed as described above. described

above.

Use the bike-to-bike frame holder (position G in the scope of

delivery) to connect the third bike to the second.

5.8 FOLDING BACK THE BICYCLE CARRIER

• Switch o the electric boot lid release, and operate it

manually.

• Fold up the bicycle carrier before opening the boot lid.

BEWARE!

Property damage due to opening the boot lid.

The boot lid could hit the bicycle carrier and be damaged.

• Make sure that there is nothing beneath the carrier.

• Keep all body parts – particularly your head – clear, and

maintain a suitably safe distance.

• Hold the carrier rmly onto the bicycle when folding it

down. Release the lock by foot, and then tilt the carrier

downwards by hand (Figure 30).

CAUTION!

Personal injury or material damage due to the sudden

folding down of the carrier.

Body parts or objects which are under or in front of the carrier

may be crushed when it is folded down.

Figure 30: Folding back the bicycle carrier

Figure 29: Opening the boot lid

• Make sure that there is nothing between the carrier and the

vehicle.

• Remove any objects between the carrier and the vehicle.

CAUTION!

Personal injury or material damage possible when

folding up the carrier.

Body parts or objects which are between the carrier and the

vehicle during folding may be crushed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufab 11602 PROBC3 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info