Bedienungsanleitung Eufab 11619 - SD260 (Seite 31 von 68) (Deutsch, Englisch, Französisch, Italienisch)

807587

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Cleaning and maintanance

Under normal conditions and use, the bike carrier only requires

cleaning, and is otherwise maintenance free.

Clean the bicycle carrier regularly when used in coastal areas or

in winter conditions in order to wash o any salt and prolong the

service life of the bicycle carrier.

The bike carrier can be cleaned with a mild cleaning agent, with

warm water and/or a soft cloth. First remove any coarse dirt and

dust.

Do not use any solvents or similar cleaning agents, since these can

damage the bike carrier.

Leave the bike carrier to dry on its own. Do not use any electrical

driers or other heating equipment to speed up the drying process.

Clean the bike carrier regularly when used in coastal areas or in

winter conditions in order to wash o any salt and prolong the

service life of the bike carrier.

Store the bike carrier in a dry and protected area when not used for

extended periods (e.g. over winter) in order to prolong the service

life of the bike carrier.

Always slide the bicycle carrier back into the transport position so

no dirt or dust can remain in the sliding mechanism and limit a

smooth sliding. In case of fouling of the sliding mechanism, rinse it

with water.

Check the bike carrier for wear before the start of every journey.

Defective parts and straps must be replaced.

The steel parts of the bike carrier are protected in the works against

corrosion by a powder coating. If this paint coating is damaged,

please have the damage rectied professionally as soon as possible.

Please refer to our customer service for the replacement of parts.

Any modication of original parts and materials or the construction

of bike carrier can adversely aect its safety and serviceability.

Remove the bike carrier from the trailer coupling, as described

under “Dismantling the bike carrier”.

Check whether the carrier is now rmly seated on the trailer

coupling, as described under “Fitting the bike carrier to the

trailer coupling”. If not, repeat the above steps.

Loosen the locking nut slightly (g. 1).

Screw in the setting screw one quarter of a turn (g. 1).

Tighten the locking nut (g. 2)

Adjustment of the quick release fastener

Carry out this maintenance operation only if the bike carrier cannot

be tted rmly to the trailer coupling, as described in the chapter

“Fitting the bike carrier to the trailer coupling”.

Disposal

Due to its lighting system, the bicycle carrier is an

electrical device.

Do not dispose of electrical appliances in household

waste! Discarded electrical and electronic

equipment must be collected separately and

recycled in an environmentally sound manner.

Contact your municipal or city government on how

to dispose of old electronic equipment.

The materials are recyclable. You are making an

important contribution to protecting our

environment through recycling, material recycling

or other forms of re-utilising old appliances!

Dispose of the bicycle rack in accordance with the

laws and conditions in your country.

SW18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufab 11619 - SD260 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info