CAUTION
Read the operating instructions carefully before using for the first time! Failure to
do so may result in injury to persons or damage to your property including the
device itself!
1. Do not exceed the maximum air pressure stated by the manufacturer!
2. Do not expose the compressor and any of its components to damp!
3. Do not operate the compressor unsupervised!
4. Keep out of reach of children and do not let children operate this device!
5. Do not use this device for any reason other than its intended use!
6. Do not alter or dismantle the compressor!
7. Should the compressor make unusual noises or start to overheat, turn it off and let it cool
down for at least 30 minutes!
8. Check the compressor before use. Damaged, torn or broken components should be
replaced or repaired by qualified personnel only!
9. Do not expose the compressor to frost, rain or temperatures over 30°C or under –30°C!
10. Never use on people or animals!
11. Ensure that the hose and cable are not exposed to sharp edges, oil or hot objects!
12. Caution! For your own safety, only use those accessories or replacement parts stated in the
instructions or which are recommended by the manufacturer!
CAUTION
These instructions are intended to provide you with information regarding
function and performance. Please retain these instructions for future reference.
Check the contents of the box for damage and completeness before using for the
first time!
Operating Instructions
Inflating car or bicycle tyres
1. Unwind the 12 volt cable and connect the 12 volt adapter with the 12 volt socket of your
vehicle.
2. Screw the threaded connector on the end of the hose onto the tyre valve.
3. Start the compressor by operating the switch (3), until the desired tyre pressure has been
reached. Switch off the compressor.
4. Disconnect the 12 volt connection from the car and remove the threaded connector from the
tyre valve.
Please note: Check the tyre pressure of your vehicle against the recommended values in the
operating instructions to avoid excess pressure. Please check bicycle tyre pressure according
to tyre designation.
Inflating sports equipment (e.g. basket balls) or balloons
1. Unwind the 12 volt cable and connect the 12 volt adapter with the 12 volt socket of
your vehicle.
2. Screw the ball/balloon adapter into the threaded connector on the end of the hose.
3. Attach the ball/balloon adapter to the valve of the object being inflated.
4. Start the compressor by operating the switch (3), until the desired firmness has been
reached or the object is completely inflated. Switch off the compressor.
5. Remove the adapter from the valve of the inflated object and unscrew the threaded
connector on the end of the hose.
6. Disconnect the 12 volt connection from the car and place the cable in the storage
compartment.
Please Note: The manometer only provides an estimate of pressure during inflation, an exact
reading cannot be made.
