Bedienungsanleitung Eufy Cam E (Seite 7 von 8) (Englisch)

706246

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

1009

accessible.

The adapter shall be installed near the equipment and shall be easily accessible.

Do not use the Device in the environment at too high or too low temperature, never expose the

Device under strong sunshine or too wet environment.

The suitable temperature for HomeBase E and accessories is -10°C-45°C.

The suitable temperature for eufyCam E and accessories is -20°C-50°C.

When charging, please place the device in an environment that has a normal room temperature and

good ventilation.

It is recommended to charge the device in an environment with a temperature that ranges from

5°C~25°C.

Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may

cause danger and violate the authorization of the projecter and the guarantee article.

This charger is for indoor use only

The charger output voltage/current is 5Vdc/2A. The plug considered as disconnect device of adapter.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based

on a distance of d=20 cm between the device and the human body. To maintain compliance with RF

exposure requirement, use product that maintain a 20cm distance between the device and human

body.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED

BATTERIES ACCORDING TO THE INSTRUCTIONS

Wi-Fi Operating Frequency Range: 2412~2472MHz for EU;

SUB-1G Frequency range: 866-866.8MHz

This product is designed and manufactured with high quality materials and components, which

can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be

delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps

protect natural resources, human health and the environment. For more information on disposal

and recycling of this product, contact your local municipality, disposal service, or the shop where

you bought this product.This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device."

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement."

Safety

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Warning:

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the

separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/

TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in

fixed/mobile exposure condition. The min separation distance is 20cm.

Notice:

Shielded cables

All connections to other computing devices must be made using shielded cables to maintain

compliance with FCC regulations.

The following importer is the responsible party

Company Name: POWER MOBILE LIFE, LLC

Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541

Telephone:1-206-383-8247

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of

conformity, visit the Web site

www.eufylife.com

Due to the used enclosure material, the product shall only be connected to a USB Interface of version

2.0 or higher. The connection to so called power USB is prohibited.

A statement regarding the AC/DC adapter as disconnect device is missing in the user manual.

The statement shall require a socket outlet that is installed near equipment and that shall be easily

Eufy Cam E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eufy Cam E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info