Bedienungsanleitung Eufy Keypad (Seite 6 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

755769

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

08 English English 09

Arm, Disarm and Turn off an Alarm

To arm the system, enter the access code and press the button.

To disarm all the sensors, enter the access code and press the button.

To turn off an alarm, enter the access code and press √. The on-going alarm will be

turned off with the device’s security mode unchanged. When you turn off the alarm,

the alarms of all the devices connected to HomeBase will be turned off.

Set Customized Security Mode

To set a customized security mode using the eufy Security app:

1. Open the App homepage.

2. Tap the “Security” tab.

3. Tap the “Modes” tab and then tap “Customize” to add your personalized

settings.

4. Follow the on-screen instructions to define the actions of sensors. When the

customized mode is activated, the sensors will act as dened in the app.

5. Go to the Keypad homepage, tap “Button Allocation” and assign the customized

mode to the button.

For example, you could customize a “Sleep Mode” in which only certain sensors

are monitored and alarms are triggered. When you press the button, “Sleep

Mode” will be activated.

Switch between Away / Home / Customized / OFF modes

To switch between Away / Home / Customized / OFF modes:

1. Enter the access code, which is an optional setting on the eufy Security app.

2. Press / / / to switch to the corresponding mode.

Note: Access code is recommended to use when you switch from Away to Off

mode, while it is not necessary otherwise.

Device Bypass

Device bypass means that the system will ignore faulty sensors for a specic time

while the system is armed.

When you switch to Home, Away or any customized security mode, the system

will check if there are any issues with all your devices. You may need to bypass a

particular sensor in the following scenarios:

• You want to leave a sensor off while the system is armed.

o Example: You arm the system but want to leave a window open.

o You are sleeping at home and want the room to be unmonitored.

• A sensor malfunctions and you don’t have time to deal with it.

• A sensor is not connected to the HomeBase and cannot be detected.

If any issues are detected, the × and √ keypad buttons will ash simultaneously. You

may need to:

• Select √ to bypass faulty devices. Then you can switch to the desired mode.

• Select × to cancel the operation. Then you cannot switch the current security

mode.

Note: • Each time you switch the security mode, the system will re-check

whether your devices are working properly.

• Make sure there is at least one active sensor in a mode that can arm

the system, or you cannot switch the security mode.

Panic Alarm

The Panic alarm can be used in the case of an emergency. To trigger an emergency

alarm, press and hold the Panic button for 3 seconds. Once the emergency alarm is

triggered, the LED indicator blinks red quickly for 3 seconds, the alarm coming from

HomeBase will be heard, and text notications will be sent to you/the administrator

via the eufy Security app and email.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufy Keypad Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info