Bedienungsanleitung Eufy RoboVac L70 Hybrid - T2190 (Seite 15 von 128) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

755671

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

26 27

English English

6. Empty any remaining water from the water tank. Clean the mopping cloth to avoid it

being mildewed and producing unpleasant smell.

24h

• It is recommended to clean the mopping cloth after mopping each time.

• Remove the mopping module when RoboVac is under charging or not in use.

Use Your RoboVac with Amazon Alexa / the Google

Assistant

Amazon Alexa or the Google Assistant is a smart voice control device that enables you to

control RoboVac with your voice.

Before you start, make sure that:

• RoboVac is attached to the Charging Base to ensure there is enough power.

• RoboVac is connected with the EufyHome app.

• You have an Alexa-enabled device (i.e. Amazon Echo, Echo Dot and Amazon Tap, Echo

Show, Echo Spot) or a device enabled with the Google Assistant (i.e. Google Home,

Google Home Mini). These devices are sold separately.

• The Amazon Alexa app or Google Home app is already installed on your smart device,

and you have created an account.

To control RoboVac with Amazon Alexa or the Google

Assistant

1. Open the EufyHome app and tap “Smart integrations” in the top left.

2. Follow the on-screen instructions to complete the setup.

- Currently this feature only supports English, German, French, and Spanish.

You can check regularly if more languages are supported at

https://www.eufylife.com/support/.

Set Up Physical / Virtual Barriers

Boundary Strips (Sold Separately)

Physical barriers including boundary strips can keep RoboVac away from cleaning certain

areas. RoboVac will recognize the barriers and will not cross into the blocked-off area.

1. Identify the area or item you do not want RoboVac to get close to.

2. Place the boundary strips FLAT on the floor or under an area rug.

• Make sure the boundary strips are placed on the same surface plane RoboVac

is used on.

• If the boundary strips are rolled up, remove and then re-apply on the floor with

adhesive tape. Otherwise the boundary strips may not work well.

Virtual Boundary (Available on the App Only)

In the EufyHome app, you can set up a “No-Go Zone” or “No-Mop Zone” as a restricted

area. This eliminates the need to use physical barriers, including Boundary Strips. This

feature is designed for dividing the cleaning zones, not for isolating hazardous areas.

• No-Go Zone: RoboVac will not enter the zone to vacuum or mop.

• No-Mop Zone: RoboVac will not enter the zone to mop, while vacuuming is still allowed.

• To set a virtual boundary, RoboVac must initially perform a cleaning run to

create a floor plan.

• To clean your home with virtual boundary, ensure that RoboVac is on the

Charging Base and that the Base has not been manually moved during

cleaning.

• Although a virtual boundary is set, RoboVac may still enter the restricted zone

due to such reasons as relocalization, wrong positioning or abnormal sensors.

• Moving the device or changing the environment may cause mapping failed

and rebuilt with virtual boundary lost.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufy RoboVac L70 Hybrid - T2190 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eufy RoboVac L70 Hybrid - T2190

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info