Bedienungsanleitung Eufy Smart Lock Front Door (Seite 8 von 12) (Englisch)

755764

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

12 English English 13

SETTING UP THE SMART LOCK

Pair Your Phone with Smart Lock

Note: The lock will not lock automatically before the setup has completed. To avoid

being locked outside, pair your phone with the Smart Lock and set an access

code for unlocking the door.

To pair your phone with the Smart Lock:

1. Scan the QR code on the back of the Smart Lock to get Bluetooth information of the

Smart Lock. Follow the on-screen instructions to complete the setup.

2. Pair your phone with the Smart Lock via Bluetooth. Your phone will search for the

Smart Lock’s Bluetooth and then connect.

• Waiting to pair: The LED indicator ashes blue.

• Paired: the LED indicator turns steady blue for 5 seconds.

Note:

• The user that is paired is the only administrator and can authorize other users

to use the lock.

• Press and hold the Setup button again, the lock will return to default settings.

All the settings will be erased and need to be reset. DO NOT press and hold

the button if unnecessary.

Calibrate Smart Lock

After the Smart Lock is successfully paired with your phone, the eufy Security app will

prompt you to calibrate the door lock.

Make sure you close the door before calibrating the Smart Lock. When the door is closed,

the door sensor will record the exact locked position so that the door will automatically

lock if the door is properly closed.

To calibrate the Smart Lock, follow the on-screen instructions to complete the process.

• Successfully calibrated: The button LED turns white for 2 seconds and then off.

The voice prompt “calibration complete” can be heard.

• Fail to calibrate: The button and status LED turn solid red for 2 seconds and then

off. The voice prompt “The deadbolt is stuck. Please return to the installation and

try again.” can be heard.

Note: If the eufy Security app fails to calibrate the lock, check whether the door has

been installed correctly and try again.

Set Access Code

After the lock is calibrated, the eufy Security app will prompt you to name your Smart

Lock and set an access code. Follow the on-screen instructions to complete the process.

The access code should be 4 to 8 characters.

Note: If you do not set the passcode and click “Return”, a message “initialization

unsuccessful” will appear. Click the card to enter the Smart Lock page. The

message “Continue or remove the device” will appear.

Set Scramble Passcode

A scramble passcode is a series of random numbers that you can input to prevent

others from spying on your actual access code. It is ideal for those living in a condo with

neighbors passing by all the time.

To set a scramble passcode, go to Settings on the eufy Security app. The scramble

passcode should be no more than 12 digits in total.

Example

Access Code: 123456

Scramble Passcode Method

1. 123456xxxxxx

2. xxxxxx123456

3. xxx123456xxx

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufy Smart Lock Front Door Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info