Sleep – gives a natural, irregular breeze that switches to low speed, irrespective
of the fan speed setting, after half an hour.
- The Swing button makes the breeze swivel from left to right horizontally; the
corresponding light will come on. Pressing it again switches this function off. By adjusting
the horizontal panels manually, you can adjust the vertical outlet direction.
- Pressing the Humidify button when the unit is on will switch on the humidification
function; the corresponding light will then come on. Pressing it again switches this
function off.
- Pressing the Ion button will switch the anion generator on; the corresponding light will
come on. Pressing it again switches this function off.
- Pressing the Timer allows you to set the required time: each press on
the button gives a further half hour, until max. 7.5 hours. Pressing it
again switches this function off. The lights indicate the set time.
When using the stove for the first time, the honeycomb filter might give off
an odour. This disappears eventually. To accelerate this process, rinse the
honeycomb filter with clean water before using it and dry it before placing it
back. You might have to repeat this several times.
Remote control
Install 2 AAA batteries in the section at the back of the remote control. You
can now operate the unit from a distance of max. 6 metres. The buttons on
the remote control correspond with those on the operating panel. The
receiver is positioned on the top left hand side of the operating panel;
always point the remote control in this direction.
Remove the batteries if the device is not going to be used for some time.
Cleaning and Maintenance
Switch off the equipment and remove the plug from the socket before
cleaning or carrying out maintenance work.
Wipe the outside of the equipment regularly with a dry or slightly damp cloth. Do not use
aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!
Ensure that the operating panel does not get wet.
Use a vacuum cleaner to carefully remove any dust and dirt from the grills and ensure
that the air intake and outlet openings are clean. Be careful not to touch or damage any
internal parts during cleaning!
1 = front panel 2 = filter 3 = honeycomb-filter
