54
If you would like to delete a specific setting, press and hold WEEK and then
search for the timer setting that you need. Go past 01- ][ and on/off first by
pressing SET briefly. When the number of the timer setting that you wish to
change appears, press SET for a little longer. You will hear a short beep and the
selected setting has been deleted.
If you wish to delete all timer settings, press the WEEK button and hold. Press
and hold the MOD and SET buttons at the same time, until you hear a beep. The
screen will show 88:88, indicating that all settings have been deleted.
Please Note: all timer settings can only be deleted with the buttons on the
operating panel, not with the remote control!
If you wish to retain the timer details but do not want to use the timer for a
while, push and hold the WEEK button and then push and hold the MOD until
TIME disappears from the screen to indicate that the data will be retained but
will not be active. By pressing MOD again until TIME appears, you will reactivate
the timer.
Screen protection: If the settings on a working heater are not adjusted for 2
minutes, the LED display will go out but ON will stay on. It will light up again when
you press a button. If the heather is switched off using the ON/OFF button, the OFF
screen will stay on.
Using with the remote control:
The remote control (5) has the same 6 buttons as the operating panel (MOD =
MODE) and works in roughly the same way, but:
You cannot use the remote control (under M-mode) to
set the capacity with the + or - buttons. Use the bar
button for this purpose.
The remote control has an ECO button for an energy
efficient mode; the heater maintains the room at 16°C.
The screen shows EC. Deactivate by pressing ECO again.
Nothing else can be set under this setting.
If the heater is working on ECO setting and a timer setting becomes
active, the heater will start to work according to the timer setting.
When the heat goes off, the heater will not return to the ECO
setting, but go off.
Working with the app via wifi:
The heater can also be operated using an app on your smartphone.
The heater must be connected with a wifi modem. See the back of
the booklet for instructions on how to install the app. By activating
the app on your smartphone or tablet, and selecting the device, you can operate
the heater with the smartphone. You do not need to set a day or time as they are
set automatically (both on the app and on the display).
You can use the app to switch the device on and off (without anticipation), regulate
the temperature and capacity, and set the ECO setting. The app can also be used to
set 20 on and off settings daily, on the weekly timer.
