Bedienungsanleitung Eurom BABY (Seite 12 von 32) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

510034

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

 Drill 2 holes at the indicated spot using an 8-

mm drill bit and insert the plugs (which are

supplied) into the holes.

 Now screw the wall holder into the wall

using the two screws. Check that the baby

heater is immovably attached. Finally,

replace the plastic cap over the wall holder;

4 clicks show that it has been correctly

attached.

Switching on and Operation

 Make sure that all the safety precautions have been fulfilled.

 Turn the Baby Heater to the required angle.

 Insert the plug into the earthed socket. By now pulling on the pull switch, you will switch on the

device. The indicator light will now light up.

For considerations of safety, the baby heater will automatically switch off after 10 minutes; in that

case, the indicator light will still be illuminated. If you then wish to switch off the baby heater, pull the

pull switch once: the indicator light will now no longer be illuminated. Then remove the plug from the

socket.

If you wish to switch the Baby Heater on again once the device has switched itself off, pull the pull

switch twice; the device will continue to operate (again for 10 minutes).

You can switch the Baby Heater off at any time by pulling the pull switch once. Don’t forget to remove

the plug from the socket!

Extra precautions

 After having been in operation for 10 minutes, the Baby Heater will automatically switch off for

safety reasons and if you wish to use the heater for longer, you can switch it back on again by

pulling the pull switch.

 The heat lamp is equipped with a special safety screen to ensure that, should the lamp ever

shatter on account of either internal or external causes (which in principle is almost impossible if

you follow the safety instructions), no glass shards can fly off.

Cleaning and Maintenance

Keep the heater clean. Switch off the heater, remove the plug from the socket and allow the heater to

cool down before cleaning or carrying out maintenance work.

 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive

soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!

 Using a vacuum cleaner, carefully remove any dust and dirt from the grills and ensure that the air

intake and outlet openings are clean. Be careful not to touch or damage any internal parts during

cleaning!

 The heater contains no other parts which need maintenance.

 At the end of the season, store the cleaned heater in the original packaging if necessary. Store it

upright in a cool, dry and dust-free place.

 Do not dispose of heater with household waste when it becomes worn or damaged beyond

repair. Take it to your local authority's collection point for electrical appliances where any reusable

materials will be collected and redistributed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom BABY Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info