Bedienungsanleitung Eurom Ballheater (Seite 10 von 28) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

510025

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

16. Never leave the heater unattended when switched on. Always switch if off before removing the plug from the

socket. Always unplug the heater when not in use! Pull on the plug to remove from the socket, never pull on

the cord!

17. Always switch the heater off, unplug it and leave to cool down before:

- cleaning the heater

- carrying out maintenance on the heater

- touching or moving the heater.

18. This machine gets hot when it is in use. To prevent burns, do not let bare skin come into contact with hot

surfaces.

19. Do not use a timer or a similar product to automatically switch on the heater. Always perform safety checks

before using the heater!

20. Close supervision is necessary when the product is used near children or incapacitated persons. Do not let

children use the appliance as a toy. This appliance is not suitable to be operated by children or persons who

have physical, sensory and/or mental limitations, or by persons who have no knowledge of, or experience

with, this appliance.

21. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of

overheating. Make sure these deposits are removed regularly.

22. Do not turn on the appliance if you have discovered damage to the appliance, cord or plug, if the appliance is

malfunctioning, if it has been dropped or when there are signs of any other defect. Return the complete

product to the vendor or to a certified electrician for inspection and/or repair. Always ask for original parts.

23. Do not use attachments and/or accessories that have not been recommended or supplied by the

manufacturer.

24. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorised and qualified

persons.

25. Only use this heater for its intended purpose and as described in this instruction manual.

Not abiding by instructions 23, 24 and 25 may lead to damage, fire and/or personal injuries. A failure to adhere to

these rules also immediately nullifies the guarantee and vendor, importer and/or manufacturer do not take

responsibility for any of the consequences!

Description

1  Thermostat dial

2  Mode selector dial

3  Air outlet grill

4  Air inlet grill

5  Base

Location and Connection

 Remove all packaging material and keep out of reach of children. After removing packaging, check the

appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not

use the appliance, but contact your vendor for inspection or replacement.

 Choose a suitable location for the heater which is at least one metre away from any obstructions, walls or

inflammable materials (see also safety instructions).

 Make sure a functioning heater is always placed on a solid, flat and horizontal surface.

 Check if the mode selector dial is set to 'OFF' ().

 Fully extend the power cord and plug into a suitable 220-240V socket. To prevent the circuit overloading,

check that no other appliances are connected to the same group.

Set-up and Operation

 Switch the heater on by turning the mode selector dial to one of three positions:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom Ballheater Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info