GENERAL SAFETY GUIDELINES
1. Read this instruction booklet carefully and fully before use.
2. Before use, check your new fireplace (including cable and plug) for any visible
damage. Never use a damaged fireplace but take it back to the supplier for a
replacement.
3. Do not use the fireplace until it has been installed as per instructions!
4. This fireplace is exclusively intended for normal, household usage. Only use for
providing additional heating in your home. This appliance is not intended for use
or fitting into vehicles or machines.
5. This fireplace is not suitable for use in wet or damp spaces such as bathrooms,
wash rooms etc. Do not place in the direct vicinity of a tap, water source or
similar and ensure that it cannot fall into water and that water cannot enter the
device. If the cable falls into water make sure you remove the plug from the
socket! Do not use a fireplace that is wet inside but take it to be repaired. Never
immerse the fireplace, cable or plug in water or any other fluid and never touch
the fireplace with wet hands.
6. The connection voltage and frequency, as given on the device, must correspond
to that of the socket to be used. The electrical installation must be protected via
an earth leakage circuit breaker (max. 30 mAmp.).
7. Extend the electric cable fully before inserting plug into socket and ensure that it
does not come into contact with the fireplace or get hot. Do not place the cable
under carpet, cover with mats or similar and do not place in areas that are
walked on frequently. Ensure that it cannot be stepped on and that no furniture
is placed on top of it. Do not bend the cable around sharp corners and do not
roll up too tightly after use.
8. The use of an extension cable is not advised as this can lead to overheating and
fire. If the use of an extension cable is unavoidable, make sure that it is not
