Bedienungsanleitung Eurom Convector panel de luxe (Seite 22 von 44) (Deutsch, Englisch, Holländisch, Französisch)

591295

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

 Pressing the high/low selection button (6) while the heater is on, switches from

high (HI) to low (LO) output or the other way around.

Switching off

 Pressing on the activation button for 3 seconds switches all functions off. The

display goes out but the ‘heater on’ (POWER) button stays lit up.

 To switch the heater off completely, set the main switch to ‘off’ (O). Make sure

that you then remove the plug from the socket.

Child lock

 When the heater is on, pressing the ‘higher’ and ‘lower' buttons simultaneously for

3 seconds will switch on the device’s child lock. The display will show a square

and then the settings. If a button is now pressed, the square will appear again but

nothing will change.

 You can unlock the heater by pressing the activation button for 3 seconds and

then pressing the ‘higher’ and ‘lower’ buttons simultaneously for 3 seconds.

Safety features

In case of internal overheating, the overheating safeguard will switch the heater off.

This may occur if the heater cannot give off enough heat or if it cannot draw in

enough fresh air. As mentioned above, this is generally caused by (partially) covering

the heater, obstructing the air intake and/or outlet grills or installing the heater too

close to a wall or something similar. After cooling down, the heater will automatically

switch on again but if the cause has not been eliminated, this could be repeated (with

all of the corresponding risks) In case of overheating, switch off the heater and

unplug. Give the heater time to cool down, remove the source of the overheating and

use as normal. If the problem persists or if you have not been able to trace the

source of the overheating, turn the heater off immediately and unplug. Contact a

servicing point to have the heater repaired.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common

cause of overheating so these should be removed regularly. Switch off the heater,

remove the plug from the socket and allow the heater to cool down before cleaning or

carrying out maintenance work.

 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not

use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or

chemical solutions!

 If the heater is hung on the wall, clean the back and the space behind the heater.

Then remove the heater from the wall, see ‘Installation – hanging’.

 Use a vacuum cleaner to carefully remove any dust and dirt from the grills and

ensure that the air intake and outlet openings are clean. Be careful not to touch

or damage any internal parts during cleaning!

 The heater contains no other parts which need maintenance.

 At the end of the season, store the cleaned heater in the original packaging if

possible. Store it upright in a cool, dry and dust-free place.

 Do not dispose of heater with household waste when it becomes worn or

damaged beyond repair. Take it to your local authority's collection point for

electrical appliances where any reusable materials will be collected and

redistributed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom Convector panel de luxe Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info