Warning! The length of the outlet pipe is especially designed to suit the Cool Perfect technique.
Do not replace or extend it using another pipe as this could have a negative impact on the
effectiveness of the Cool Perfect. The hose can be stretched but must be kept as short as
possible (max. 40 cm) in order to ensure optimum functioning.
Warning! A small quantity of water can also condense during ‘Cooling’ or ‘Heating’. The device
has a small water tank for this purpose. When it is full the WF light will light up. After 5 minutes
the error code E2 will appear in the display. Empty the tank by connecting a water hose. See
‘Dehumidification’.
Make sure that all connections are secured properly, that the unit is not damaged or broken and
that the socket to which you wish to connect the Cool Perfect is the same voltage as stated on
the device's specification plate. Only use an undamaged, earthed socket that is secured with a
30 mA earth leakage circuit breaker.
If everything is ok, insert the plug into the socket. Your device is ready for use.
OPERATION
Via the control panel on the air conditioner
Functions:
1. Power = ON/OFF button
Switch the unit on or off using this button.
2. Temp - = Temperature regulation down
During cooling: every time you press this button, the set temperature will decrease by one
degree to a minimum of 16°. During heating: every time you press this button, the set
temperature will decrease by one degree to a minimum of 16°.
3. Sleep = Sleep function
The sleep function will be selected if you press this button while using the cooling function. After
one hour, the set temperature will be increased by one degree; it will increase by a further
degree after a second hour. This setting will be maintained. During the sleep function, the fan
works on low speed.
