If the Cool Perfect is not in use or you are cleaning or carrying out maintenance on it, turn it
off and remove the plug from the socket. Always turn off first and then remove the plug!
When you switch off the Cool Perfect, wait at least 3.5 minutes before reusing to avoid
damaging the compressor.
Avoid the use of extension cables if you can. If this is unavoidable, use a cable with diameter
of at least 1.5 mm² and do not let it cross any walking routes!
This unit needs max. 7 Amp power. So never connect any other equipment that requires a
high current to the same group. Otherwise, you may cause a power outage.
Do not move the Cool Perfect by tugging on the electric cable and never remove the plug
from the socket by pulling the cable.
Do not use the unit if the electrical cable, plug or device is damaged or broken. The device,
plug and/or cable must be repaired/replaced by an electrician or another suitably qualified
person. Repairs by unqualified persons will result in the guarantee becoming null and void
and could lead to dangerous situations!
For maximum effect:
Use a unit that is suitable for the area to be heated/cooled.
Do not place the Cool Perfect in the vicinity of a heat source or in direct sunlight.
Close windows and doors.
Keep curtains or hatches closed during the sunniest hours in the day
Keep filters clean
Modify temperature and ventilation settings once the area has reached the required condition.
DESCRIPTION
1. Control panel
2. Receiver point for
remote control
3. Adjustable fins
4. Hose connection –
window kit
5. Flexible air outlet pipe
6. Hot air filter
7. Water outlet
8. Hot air outlet
9. Cold air filter
A. Flexible hose
B. Hose connection for
window kit
C. Window kit
D. Hose connection heating
E. Fan blade
F. Remote control
Check device and accessories before use!
