Bedienungsanleitung Eurom E-Convect defrost 400 - tot 2018 (Seite 19 von 48) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

701883

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Using for the first time and Operation

 Check that the heater stands/is suspended firmly and that all safety requirements

have been met.

 Set the thermostat button to 'max'.

 Now insert the plug into the earthed 220/-240V socket. The check lamp will

come on and the heater will start to work.

 If the space has reached the required temperature, turn back the temperature

knob slowly until you hear a click. The heater will now retain the set temperature

by switching on and off at regular intervals. To set the temperature a little higher

or lower, turn the knob a little towards 'max' or 'min' respectively.

 Turning the thermostat knob fully to 'min' will retain a temperature of 5°C in the

space, this is the frost protection functionality.

 To switch the heater off, remove the plug from the socket.

Safety features

The heater is fitted with a tipping safeguard which automatically shuts off the

appliance if it inadvertently falls over. When the heater is returned to its upright

position, it will resume functioning as normal but, before reusing, switch off, unplug

and check for damage. Do not use the heater if it is damaged or malfunctioning, but

have it inspected/repaired!

In case of internal overheating, the overheating safeguard will switch the heater off.

This may occur if the heater cannot give off enough heat or if it cannot draw in

enough fresh air. As mentioned above, this is generally caused by (partially) covering

the heater, obstructing the air intake and/or outlet grills or installing the heater too

close to a wall or something similar. In case of overheating, switch off the heater and

unplug. Give the heater time to cool down, remove the source of the overheating and

use as normal. If the problem persists or if you have not been able to trace the

source of the overheating, turn the heater off immediately and unplug. Contact a

servicing point to have the heater repaired.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common

cause of overheating so these should be removed regularly. Switch off the heater,

remove the plug from the socket and allow the heater to cool down before cleaning or

carrying out maintenance work.

 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not

use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or

chemical solutions!

 Use a vacuum cleaner to carefully remove any dust and dirt from the grills and

ensure that the air intake and outlet openings are clean. Be careful not to touch

or damage any internal parts during cleaning!

 The heater contains no other parts which need maintenance.

 At the end of the season, store the cleaned heater in the original packaging if

possible. Store it upright in a cool, dry and dust-free place.

 Do not dispose of heater with household waste when it becomes worn or

damaged beyond repair. Take it to your local authority's collection point for

electrical appliances where any reusable materials will be collected and

redistributed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom E-Convect defrost 400 - tot 2018 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info