32
Safety feature
In case of internal overheating, the overheating safeguard will switch the heater
off. This may occur if the heater cannot give off enough heat or if it cannot draw in
enough fresh air. As mentioned above, this is generally caused by (partially) covering
the heater, or installing the heater too close to a wall or something similar. In case
of overheating, switch off the heater and unplug. Give the heater time to cool down,
remove the source of the overheating and use as normal. If the problem persists or
if you have not been able to trace the source of the overheating, turn the heater off
immediately and unplug. Contact a servicing point to have the heater repaired.
Cleaning and maintenance
Keep the heater clean. Switch off the heater, remove the plug from the socket and
allow the heater to cool down before cleaning or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not
use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical
solutions!
If you want to clean away the E-convect LCD in control at the end of the season,
store it, if possible in the original packaging, upright in a cool, dry and dust-free
place.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment
contains valuable materials, suitable for recycling. These
materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that
you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure
that as many of the components as possible can be recycled.
